7WBD3306MUTAG
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-UFDFN |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Type | Bus Switch |
| Resistance | 70Ohm |
| Subcategory | Bus Driver/Transceivers |
| Max Power Dissipation | 1.127W |
| Voltage - Supply | 4V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.4mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 7WBD3306 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Circuit | 1 x 1:1 |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Ports | 2 |
| Number of Bits | 1 |
| Propagation Delay | 250 ps |
| Quiescent Current | 1mA |
| Turn On Delay Time | 4.8 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE WITH SERIES RESISTOR |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Height Seated (Max) | 0.55mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
7WBD3306MUTAG Overview
In order to save board space, digital switch is located in the 8-UFDFN.It is packaged in the way of Tape & Reel (TR).digital switch ic uses the method of Surface Mount for mounting.In the multiplexers, the analog IC is indicated by Bus Switch.When the operating temperature is kept at -55°C~125°C, the machine will not be sensturn signal switchive to external influences.With a supply voltage of 4V~5.5V, designers have greater flexibility of digital controlled switch.This configuration includes 8 terminations as part of its basic functionality.There is a base part number of 7WBD3306 which can also be used in order to locate the logic switch that are related to this item.The multiplexer's system is powered by 5V voltage.There are 8 component pins in this turn signal switch.As a result, conductors end at NO LEAD.There is a type of supply Single that is employed in this case.With 8 pins, it is configured.The logic switch is a member of the CBT/FST/QS/5C/B family.In the signal multiplexer, there are 1 bits available.Keep Vsup at 4V to avoid unnecessary failures.During mux switch's normal operation, 5V is provided with a power supply.In electronic terms, the digital switch ic is classified as part number Bus Driver/Transceivers.There are no external influences on this multiplexer ic, so it consumes 1mA current.The performance of the multiplexers of a system can be reliably achieved with a supply voltage of 5V.A resistance of 2 governs its operation.In terms of resistance, it has a value of 70Ohm.The mux switch configuration consists of 2 elements.
7WBD3306MUTAG Features
Supplied in the 8-UFDFN package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
7WBD3306MUTAG Applications
There are a lot of ON Semiconductor 7WBD3306MUTAG Signal Switches / Multiplexers / Decoders applications.
- Computer memory
- Data communication
- Electronic circuits
- Frequency multiplexing system
- Automation system
- Audio transmission
- Automatic Monitoring systems
- Enabling block of memory depending on address in memory chips
- HD surveillance system
- Electronics industry
