7WBD3306USG
| Parameters | |
|---|---|
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 7WBD3306 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Circuit | 1 x 1:1 |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Ports | 2 |
| Number of Bits | 1 |
| Propagation Delay | 250 ps |
| Quiescent Current | 1mA |
| Turn On Delay Time | 4.8 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE WITH SERIES RESISTOR |
| Halogen Free | Halogen Free |
| Supply Type | Single |
| Address Bus Width | 2b |
| Output Polarity | TRUE |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Height | 900μm |
| Length | 2.1mm |
| Width | 2.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-VFSOP (0.091, 2.30mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Type | Bus Switch |
| Resistance | 70Ohm |
| Terminal Finish | Nickel/Gold/Palladium (Ni/Au/Pd) |
| Subcategory | Bus Driver/Transceivers |
| Max Power Dissipation | 498mW |
| Voltage - Supply | 4V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
7WBD3306USG Overview
It is included in the 8-VFSOP (0.091, 2.30mm Width) in order to save board space.The package is in the form of Tape & Reel (TR).In terms of mounting, digital switch ic uses the method of Surface Mount.The multiplexers uses an analog IC Bus Switch as the analog part of the circuit.As long as the operating temperature is -55°C~125°C, turn signal switch will not be influenced by external factors.It provides digital controlled switch's superior flexibility for designers to use when it operates with a supply voltage of 4V~5.5V.provides digital controlled switch's digital controlled switch'sIt is designed with 8 terminations as part of its basic configuration.The base part number is 7WBD3306, which can also be used to find its logic switch related parts.The multiplexer is supplied with 5V voltage.This turn signal switch has a total of 8 component pins.GULL WING represents the end of conductors.Its supply type is Single, which is used as the source of power.The board has 8 pins configured.Among the family of CBT/FST/QS/5C/B the logic switch is a member.There are 1 bits signal multiplexer provides.Keep Vsup at 4V to avoid unnecessary failures.There is a power supply provided for the mux switch's normal operation of 5V.In electronic terms, the digital switch ic is classified as part number Bus Driver/Transceivers.There are no external influences on this multiplexer ic, so it consumes 1mA current.With a supply voltage of 5V, reliable performance of the multiplexers can be achieved.The system operates with a resistance of 2.With a resistance of 70Ohm, it operates.In the mux switch configuration, there are 2 elements.
7WBD3306USG Features
Supplied in the 8-VFSOP (0.091, 2.30mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
7WBD3306USG Applications
There are a lot of ON Semiconductor 7WBD3306USG Signal Switches / Multiplexers / Decoders applications.
- Data-routing applications
- PCIe
- Microprocessor memory systems
- Steel plants
- Analog to digital conversion
- Memory chips
- High-performance memory systems
- Automatic health monitoring systems
- Enabling block of memory depending on address in memory chips
- Medical industry
