7WBD383AMUTCG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-UFQFN |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Type | Bus FET Exchange Switch |
| Resistance | 70Ohm |
| Terminal Finish | Nickel/Gold/Palladium (Ni/Au/Pd) |
| Subcategory | Other Logic ICs |
| Max Power Dissipation | 601mW |
| Voltage - Supply | 4V~5.5V |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 7WBD383 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Circuit | 2 x 1:1 |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Ports | 2 |
| Number of Bits | 2 |
| Propagation Delay | 250 ps |
| Quiescent Current | 1mA |
| Turn On Delay Time | 4.8 ns |
| Family | CBT/FST/QS/5C/B |
| Number of Inputs | 2 |
| Halogen Free | Halogen Free |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height Seated (Max) | 0.6mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
7WBD383AMUTCG Overview
The reason it is provided is that the board space can be saved by placing digital switch in the 8-UFQFN.The package is packaged in the manner of Tape & Reel (TR).In terms of mounting, digital switch ic uses the Surface Mount method .A digital IC Bus FET Exchange Switch is used as the analog component of the multiplexers.A temperature of -55°C~125°C will not leave the turn signal swturn signal switchch susceptible to external influences.A supply voltage of 4V~5.5V provides digital controlled switch's superior flexibility for designers.As parts of its basic configuration, 8 terminations are desgined.You can also find related parts by using its logic switch base part number of 7WBD383.In this case, 4.5V is the voltage supplied to the multiplexer's system.A component pin count of 8 can be found on this turn signal switch.As a result, conductors end at NO LEAD.There is a supply type of Single employed as part of this supply.The board has 8 pins configured.The logic switch object belongs to the family of CBT/FST/QS/5C/B.As a result, signal multiplexer provides a total of 2 bits.To avoid unnecessary failures, keep the supply voltage at 4V (Vsup).In order to maintain mux switch's normal operation, power is provided to 5V.In electronic terms, the digital switch ic is classified as part number Other Logic ICs.In the absence of external influences, it consumes 1mA current of multiplexer ic.Supply voltages of 5V can provide reliable performance of the multiplexers.The multiplexer provides 2 inputs.The system operates with a resistance of 2.With a resistance of 70Ohm, it operates.
7WBD383AMUTCG Features
Supplied in the 8-UFQFN package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
7WBD383AMUTCG Applications
There are a lot of ON Semiconductor 7WBD383AMUTCG Signal Switches / Multiplexers / Decoders applications.
- Medical industry
- Injectors
- Automation system
- Data communication
- Recording transmission
- Memory system of computers
- Paper plants
- Small scale TV wall
- Data transfer
- D/A converters
