Parameters |
Number of Ports |
2 |
Number of Bits |
2 |
Propagation Delay |
250 ps |
Quiescent Current |
1mA |
Turn On Delay Time |
4.8 ns |
Family |
CBT/FST/QS/5C/B |
Number of Inputs |
2 |
Halogen Free |
Halogen Free |
Supply Type |
Single |
Output Polarity |
TRUE |
High Level Output Current |
-128mA |
Low Level Output Current |
128mA |
Voltage Supply Source |
Single Supply |
Independent Circuits |
1 |
Height Seated (Max) |
0.9mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 day ago) |
Contact Plating |
Tin |
Mounting Type |
Surface Mount |
Package / Case |
8-VFSOP (0.091, 2.30mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Operating Temperature |
-55°C~125°C |
Packaging |
Tape & Reel (TR) |
Published |
2006 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
Type |
Bus FET Exchange Switch |
Resistance |
70Ohm |
Terminal Finish |
Nickel/Gold/Palladium (Ni/Au/Pd) |
Subcategory |
Other Logic ICs |
Max Power Dissipation |
498mW |
Voltage - Supply |
4V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
4.5V |
Terminal Pitch |
0.5mm |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
7WBD383 |
Pin Count |
8 |
Operating Supply Voltage |
5V |
Circuit |
2 x 1:1 |
Power Supplies |
5V |
Supply Voltage-Min (Vsup) |
4V |
7WBD383USG Overview
For the purpose of saving board space, digital switch is included in the 8-VFSOP (0.091, 2.30mm Width).In this case, it is packaged as Tape & Reel (TR).Surface Mount is the mounting method digital switch ic uses.The multiplexers uses an analog IC Bus FET Exchange Switch as the analog part of the circuit.A temperature of -55°C~125°C will not leave the turn signal swturn signal switchch susceptible to external influences.When operated with a 4V~5.5V supply voltage, digital controlled switch provides digital controlled switch's superior flexibility for designers.Its basic configuration includes terminations in the 8 range.As its base part number is 7WBD383, logic switch can also be used to find its related parts.The voltage supplied for multiplexer's system is 4.5V.multiplexer's systemA component pin count of 8 is found on this turn signal switch.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.In this case, the supply type is Single.This multiplexer ic has 8 pins configured.Among the family of CBT/FST/QS/5C/B the logic switch is a member.In this signal multiplexer, there are 2 bits provided.To prevent unnecessary failures, it is recommended that the minimum supply voltage (Vsup) remain at 4V.In order to maintain mux switch's normal operation, power is provided to 5V.The digital switch ic is an electronic part classified into Other Logic ICs.In the absence of external influences, it consumes 1mA current of multiplexer ic.The performance of the multiplexers of a system can be reliably achieved with a supply voltage of 5V.There are 2 inputs provided in this multiplexer.With a resistance of 0, it operates.A resistance of 70Ohm is used to operate it.
7WBD383USG Features
Supplied in the 8-VFSOP (0.091, 2.30mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
7WBD383USG Applications
There are a lot of ON Semiconductor 7WBD383USG Signal Switches / Multiplexers / Decoders applications.
- Speed control of medern motors
- Implementing boolean functions with multiple variables
- Analog to digital conversion
- HD surveillance system
- Enabling different functions units in microprocessor instruction decoding
- War field flying robot with a night vision flying camera
- Signal router
- Image transmission
- Make full adder
- To select different devices in microprocessor input