8100606EA
| Parameters | |
|---|---|
| Package / Case | CDIP |
| Surface Mount | NO |
| Number of Pins | 16 |
| Published | 2003 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 75Ohm |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| HTS Code | 8542.39.00.01 |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | THROUGH-HOLE |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| Operating Supply Voltage | 15V |
| Temperature Grade | MILITARY |
| Number of Channels | 2 |
| Analog IC - Other Type | DPST |
| Turn On Delay Time | 400 ns |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 200 ns |
| Max Dual Supply Voltage | 18V |
| Min Dual Supply Voltage | 4.5V |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 375ns |
| Switch-off Time-Max | 250ns |
| Normal Position | NO |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
8100606EA Overview
Presented in CDIP, this electrical component is convenient for overseas shipping. The total number of terminations is 16. The electronic part delivers high-quality output through its 2 channels. If the voltage supply is 15V volts, the electrical component should be turned on and run. 16 pins are injected to the electronic part body. An switch multiplexer with 75Ohm internal resistance has a value of 75Ohm. The functions of 16 pins can be found in the datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 18V. With dual power supplies, you should attach at least 4.5V. Integrated with an analog IC DPST. The digital multiplexer has SEPARATE OUTPUT outputs that can be used. A voltage of 15V can be used to operate the electronic component. Temperatures above 125°C should not be used to operate the switches.
8100606EA Features
2 Channels
8100606EA Applications
There are a lot of Maxim Integrated 8100606EA Analog Switches & Multiplexers ICs applications.
- MP3 players
- PBX interfaces
- Industrial
- PDH Multiplexers
- Central office
- Frame Relay Equipment
- Imaging
- FTTH
- SDH/SONET multiplexers
- E1 Network Equipment
