82V2048DAG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 144 |
| Published | 2010 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 144 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Digital Transmission Interfaces |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 144 |
| Operating Supply Voltage | 3.3V |
| Power Supplies | 3.33.3/5V |
| Temperature Grade | INDUSTRIAL |
| Interface | Parallel, Serial |
| Max Supply Voltage | 3.47V |
| Min Supply Voltage | 3.13V |
| Power Dissipation-Max | 1.6W |
| Operating Supply Current | 55mA |
| Nominal Supply Current | 55mA |
| Max Supply Current | 65mA |
| Frequency (Max) | 2.048MHz |
| Data Rate | 2.048 Mbps |
| Telecom IC Type | PCM TRANSCEIVER |
| Number of Transceivers | 8 |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 20mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
82V2048DAG Overview
Board space can be saved by using the TQFP package.Mounted in Surface Mount-direction.There are 144 terminations can be found in telecom switching configuration.The voltage it operates at is 3.3V.144 pins are present on this telecom interface.The telecom IC type is PCM TRANSCEIVER.The telecom circuit operates with a supply voltage of 3.3V, giving designers a great deal of freedom.The supply current of 55mA allows designers to have a great deal of flexibility.Digital Transmission Interfaces subcategories telecommunications device .To ensure normal operation, -40°C must be set at a minimum value.Normal operation is ensured by setting 85°C to the maximum value.While designing, telecommunications device has 1 functions configured.Voltage supplied should be 3.13V at least.If the voltage supplied is lower than 3.47V, telecommunications device should be used.144 telecom product pins are designed for its configuration.In order to maintain normal operation, the supply current should be maintained at 65mA.It incorporates with 8 transceivers.
82V2048DAG Features
Available in the TQFP package
PCM TRANSCEIVER as telecom IC type
Operating supply voltage of 3.3V
Operating supply current of 55mA
8 transceivers
82V2048DAG Applications
There are a lot of Integrated Device Technology (IDT) 82V2048DAG Telecom applications.
- Cable modem
- Codec function on telephone switch line cards
- Remote wireless modules
- BITS Timing
- Intelligent PBX
- Inverse Multiplexing for ATM (IMA) Wireless Base Stations
- Interfaces to DS3
- ISDN Primary Rate Interface
- SONET/SDH terminal
- M13 MUX
