83020012A
| Parameters | |
|---|---|
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 83020012 |
| Pin Count | 20 |
| Qualification Status | Qualified |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 25mA |
| Number of Bits | 8 |
| Propagation Delay | 19 ns |
| Turn On Delay Time | 2 ns |
| Family | ALS |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 2.6mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Control Type | ENABLE LOW |
| Power Supply Current-Max (ICC) | 27mA |
| Number of Output Lines | 8 |
| Count Direction | UNIDIRECTIONAL |
| Height | 2.03mm |
| Length | 8.89mm |
| Width | 8.89mm |
| Thickness | 1.83mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-CLCC |
| Number of Pins | 20 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Subcategory | Bus Driver/Transceiver |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
83020012A Overview
The 20-CLCC package contains it. Tube is the way in which it is packaged. The output it is configured with uses Tri-State. D-Type Transparent Latch is the logic type of this electrical device. The electronic component is mounted according to the Surface Mount method. The supply voltage of the device is 4.5V~5.5V. There is a temperature of -55°C~125°C at which the system operates. There are 8 bits in this electronic part. This device is designed with 20 terminations. As a member of the 83020012 family, it falls under that category. The supply voltage of the device is 5V. There are 20 pins attached to it. This electronic device belongs to the family of ALS. With the design of the board, there are only 20 pins. Surface Mount is the way in which this electronic part is mounted. In this device, there is a total of 2 ports available for use. Bus Driver/Transceiver is the subcategory of this part. It operates from 5V power supplies. In order to achieve high efficiency, the supply voltage should be kept at 5V. It follows that 8 output lines are generated from the binary equivalent of the input line. A total of 1 elements make up this object. In order for the device to operate at its maximum power, the maximum power current (ICC) of 27mA is needed for operation.
83020012A Features
20-CLCC package
8 Bits
83020012 family
20 pin count
20 pins
5V power supplies
1 elements
83020012A Applications
There are a lot of Texas Instruments 83020012A Latches applications.
- Hammer Device Information
- BCD counting
- Timers
- Display
- Digital bus buffer
- Accumulator Registers
- Bus system register with enable parallel lines at bus side
- Phase comparator
- Lamp and Display (LED)
- Relay replacement
