Parameters |
Factory Lead Time |
1 Week |
Mount |
Through Hole |
Mounting Type |
Through Hole |
Package / Case |
Radial, Can |
Operating Temperature |
-55°C~105°C |
Packaging |
Tape & Box (TB) |
Series |
WCAP-PTHR |
Size / Dimension |
0.315Dia 8.00mm |
Tolerance |
±20% |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Type |
Polymer |
Max Operating Temperature |
105°C |
Min Operating Temperature |
-55°C |
Applications |
General Purpose |
Voltage - Rated |
35V |
Capacitance |
33μF |
Voltage - Rated DC |
35V |
Lead Pitch |
3.5052mm |
ESR (Equivalent Series Resistance) |
30mOhm |
Polarity |
Polar |
Lead Spacing |
0.138 3.50mm |
Lifetime @ Temp |
2000 Hrs @ 105°C |
Ripple Current |
2.5A |
Life (Hours) |
2000 hours |
Ripple Current @ Low Frequency |
125mA @ 120Hz |
Ripple Current @ High Frequency |
2.5A @ 100kHz |
Height Seated (Max) |
0.354 9.00mm |
REACH SVHC |
Unknown |
RoHS Status |
ROHS3 Compliant |
The capacitance can run at the range of 33μF.
±20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial, Can. This capacitor is accessible in the Tape & Box (TB) packaging. It belongs to WCAP-PTHR series. This part is mounted in the way of Through Hole. The type of the 870055674003 capacitor can be classified as Polymer. It is suitable for the component connected in General Purpose. This device operates temperature at the range of -55°C~105°C. Würth Elektronik 870055674003 is suitable to conduct the ripple current at 2.5A. 870055674003 Capacitor is mounted by Through Hole. The typical values of Voltage - Rated DC are 35V. 870055674003 Capacitor. Voltage - Rated often has values of 35V. This device's minimum working temperature must not be less than -55°C. It's recommended that you utilize it when the temperature is below 105°C.
WCAP-PTHR Series
Capacitance: 33μF
Tolerance: ±20%
Package / Case: Radial, Can
Packaging: Tape & Box (TB)
Works Operating Temperature: -55°C~105°C
There are great quantities of applications of 870055674003 Aluminum Polymer Capacitors.
Typically, 870055674003 is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.
- Spot Welding
- DC/DC, DC/AC, and AC/AC converters
- PFC
- Motor Start
- DC Buffering
- Bypassing Noise Filtering
- Power Line Buffering
- To enhance power efficiency
- To reduce power noise & signal noise
- DC Link