874001AGI-05LF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 20 |
| Weight | 190.990737mg |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 640MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 20 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Power Dissipation-Max | 406.8mW |
| Operating Supply Current | 75mA |
| Nominal Supply Current | 75mA |
| Frequency (Max) | 640MHz |
| Input | LVDS |
| Logic IC Type | PLL BASED CLOCK DRIVER |
| PLL | Yes |
| Height | 1mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
874001AGI-05LF Overview
As part of the packaging, there is a serial number TSSOP associated with the product. As far as terminations are concerned, there are 20. The part provides a voltage of 3.3V volts. Running 260 utilizes this part's peak reflow temperature. normaloperation has a frequency of 640MHz. Of the part, there are 2007 publications. Surface Mount is recommended for mounting. Devices with 20 pins are designed. There are 20 pins on it. There must be -40°C minimum operating temperature for this device. Circuits application is recommended to operate at a temperature lower than 85°C. 3.3V is the recommended supply voltage. There is a possibility that the device will be able to maintain 1 outputs. A supply voltage of 3.6V is used for this part. For the device to maintain a supply voltage above 3V. Logic IC type PLL BASED CLOCK DRIVER is used. There is a typical supply current of 75mA for this DAC. This device is extremely efficient at frequencies of 640MHz.
874001AGI-05LF Features
Peak Reflow Temperature (Cel): 260
with 20 Pins
operate supply voltage at the range of 3.3V
Logic IC Type: PLL BASED CLOCK DRIVER
874001AGI-05LF Applications
There are a lot of Integrated Device Technology (IDT) 874001AGI-05LF application specific timer?applications.
- 1 GbE and 10 GbE
- eCPRI RRH (Remote Radio Head)
- Broadcast video/audio timing
- Printers
- Test and Measurement
- Any-frequency clock conversion
- Test and Measurement
- HDTV, DVD/Blu-ray, set-top box
- GbE/10 GbE/100 GbE Synchronous Ethernet (ITU-T G.8262)
- Processor and FPGA clocking
