8N3Q001EG-0102CDI
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | CLCC |
| Number of Pins | 10 |
| Packaging | Bulk |
| Published | 2007 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | ENABLE/DISABLE FUNCTION; DIFFERENTIAL OUTPUT; SELECTABLE O/P FREQUENCIES; TRAY |
| HTS Code | 8542.39.00.01 |
| Supply Voltage | 3.3V |
| Frequency | 125MHz |
| Frequency Stability | 50 ppm |
| Physical Dimension | 7.0mm x 5.0mm x 1.55mm |
| Operating Frequency | 25MHz |
| Operating Supply Voltage | 3.3V |
| Rise Time-Max | 0.425ns |
| Fall Time-Max | 0.425ns |
| Symmetry-Max | 55/45% |
| Supply Voltage-Max (Vsup) | 3.465V |
| Operating Supply Current | 140mA |
| Oscillator Type | LVPECL |
| Output Load | 50 OHM |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
8N3Q001EG-0102CDI Overview
In the packaging, the clock timer is enclosed with the CLCC code on the back. 125MHz sets the frequency of the programmable timer.It is used to pack in Bulk case. To mount this digital timer with Surface Mount. The operating supply voltage is rated at 140mA voltage. The minimum operating temperature of the chip must not be lower than -40°C. It's best to use the timer clock when the temperature is below 85°C. The types of oscillator includes LVPECL. The timer clock contains 10 pins. The digital timer's operating supply voltage is rated 3.3V voltage. The supply voltage of the programmable timer can rate 3.3V. You can read the timer clock's additional feature in the follwing: ENABLE/DISABLE FUNCTION; DIFFERENTIAL OUTPUT; SELECTABLE O/P FREQUENCIES; TRAY. On operating frequency, it's available in the range of 25MHz.
8N3Q001EG-0102CDI Features
Operate frequency at 125MHz
Package / Case: Bulk
Max Operating temperature at -40°C
Additional Feature: ENABLE/DISABLE FUNCTION; DIFFERENTIAL OUTPUT; SELECTABLE O/P FREQUENCIES; TRAY
8N3Q001EG-0102CDI Applications
There are a lot of Integrated Device Technology (IDT) 8N3Q001EG-0102CDI Programmable Timers & Oscillators applications.
- Periodic “Wake-Up” Call
- Intruder Detection
- Clutch Actuator circuit
- Building Automation
- Electric Vehicles
- Consumer Electronics
- Sensor Node
- Remote current sensor
- Smart Key
- Motor control
