8N3Q001EG-1049CDI8
| Parameters | |
|---|---|
| Frequency Stability | 50 ppm |
| Physical Dimension | 7.0mm x 5.0mm x 1.55mm |
| Operating Frequency | 150MHz |
| Operating Supply Voltage | 3.3V |
| Rise Time-Max | 0.425ns |
| Fall Time-Max | 0.425ns |
| Symmetry-Max | 55/45% |
| Supply Voltage-Max (Vsup) | 3.465V |
| Operating Supply Current | 140mA |
| Oscillator Type | LVPECL |
| Output Load | 50 OHM |
| Length | 7mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | CLCC |
| Number of Pins | 10 |
| Packaging | Tape & Reel |
| Published | 2007 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | ENABLE/DISABLE FUNCTION; DIFFERENTIAL OUTPUT; SELECTABLE O/P FREQUENCIES; TR |
| HTS Code | 8542.39.00.01 |
| Supply Voltage | 3.3V |
| Depth | 5mm |
| Frequency | 150MHz |
8N3Q001EG-1049CDI8 Overview
CLCC comes in a package with the timer clock. Frequency is set to 150MHz on the programmable timer.It is used to pack in Tape & Reel case. To mount this digital timer with Surface Mount. The operating supply voltage is rated at 140mA voltage. The minimum operating temperature of the chip must not be lower than -40°C. It's best to use the timer clock when the temperature is below 85°C. The types of oscillator includes LVPECL. The timer clock contains 10 pins. The digital timer's operating supply voltage is rated 3.3V voltage. The supply voltage of the programmable timer can rate 3.3V. You can read the timer clock's additional feature in the follwing: ENABLE/DISABLE FUNCTION; DIFFERENTIAL OUTPUT; SELECTABLE O/P FREQUENCIES; TR. On operating frequency, it's available in the range of 150MHz.
8N3Q001EG-1049CDI8 Features
Operate frequency at 150MHz
Package / Case: Tape & Reel
Max Operating temperature at -40°C
Additional Feature: ENABLE/DISABLE FUNCTION; DIFFERENTIAL OUTPUT; SELECTABLE O/P FREQUENCIES; TR
8N3Q001EG-1049CDI8 Applications
There are a lot of Integrated Device Technology (IDT) 8N3Q001EG-1049CDI8 Programmable Timers & Oscillators applications.
- Battery Powered Systems
- High Vibration, High Acceleration Environments
- Remote current sensor
- Intruder Detection
- Internet of Things (IoT)
- Home Automation Sensors
- Car Door Handle circuit
- Precision timing
- “Heartbeat” Timers
- Low-Power Wireless
