8N4Q001EG-2197CDI8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | CLCC |
| Number of Pins | 10 |
| Weight | 186.029571mg |
| Published | 2007 |
| Termination | SMD/SMT |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Frequency | 175MHz |
| Frequency Stability | 50 ppm |
| Operating Supply Voltage | 3.3V |
| Max Supply Voltage | 3.465V |
| Min Supply Voltage | 3.135V |
| Operating Supply Current | 160mA |
| Height | 1.5mm |
| Length | 7mm |
| Width | 5mm |
| RoHS Status | RoHS Compliant |
8N4Q001EG-2197CDI8 Overview
In the packaging, the clock timer is enclosed with the CLCC code on the back. In this example, the programmable timer's frequency is set to 175MHz.To mount this digital timer with Surface Mount. The operating supply voltage is rated at 160mA voltage. The minimum operating temperature of the chip must not be lower than -40°C. It's best to use the timer clock when the temperature is below 85°C. The timer clock contains 10 pins. The digital timer's operating supply voltage is rated 3.3V voltage. The timer clock has 186.029571mg in weight. The minimum supply voltage of the chip must not be lower than 3.135V. The supply voltage of this chip should not exceed 3.465V.
8N4Q001EG-2197CDI8 Features
Operate frequency at 175MHz
Max Operating temperature at -40°C
8N4Q001EG-2197CDI8 Applications
There are a lot of Integrated Device Technology (IDT) 8N4Q001EG-2197CDI8 Programmable Timers & Oscillators applications.
- Domestic appliances
- Remote current sensor
- Sensor Node
- Home Automation Sensors
- Tamper Detection
- Power-Gating Applications
- Low-Power Wireless
- Periodic “Wake-Up” Call
- Energy Harvesting Systems
- Remote Data-Logger
