9204202EA
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-CDIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Bulk |
| Published | 2016 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Max Power Dissipation | 900mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 16 |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 2.7V |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Power Dissipation | 900mW |
| Number of Inputs | 8 |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Max Dual Supply Voltage | 6.5V |
| On-State Resistance (Max) | 100Ohm |
| Min Dual Supply Voltage | 2.7V |
| High Level Output Current | 30mA |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 75 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 3pF 14pF |
| On-state Resistance Match-Nom | 15Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 150ns, 150ns |
| Charge Injection | 20pC |
| Channel-to-Channel Matching (ΔRon) | 15 Ω (Max) |
| Switch-off Time-Max | 150ns |
| Neg Supply Voltage-Min (Vsup) | -5V |
| Voltage - Supply, Dual (V±) | ±15V |
| Length | 19.305mm |
| RoHS Status | Non-RoHS Compliant |
9204202EA Overview
Packed in 16-CDIP (0.300, 7.62mm), the electronic component is convenient for shipping overseas. High reliability is provided by advanced packaging method Bulk. There is an analog multiplexer mounted in position Through Hole. Multiplexers and demultiplexers have a number of circuits 4:1. Operating temperature around -55°C~125°C TA extended. In total, 16 terminations have occurred. As a result of its 4 channels, this electronic component provides high-quality output. Turning on and running the electrical part should be easy with a 15V voltage supply. An electrical component like this is included in the 16 series. The analog switch ics are built using SP4T switching circuits. 2 circuits are used in this analogue multiplexer. For functions related to 16 pins, please refer to the datasheets. It is normally recommended that users do not supply the multiplexer with voltages higher than 12V. It is recommended that the electrical component receives a voltage of 2.7V. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 6.5V. The voltage should be at least 2.7V if you are using dual power supplies. It is integrated with DIFFERENTIAL MULTIPLEXER analog ICs. In order to operate the 8 inputs, there are several steps to follow.
9204202EA Features
4 Channels
Switch Circuit: SP4T
9204202EA Applications
There are a lot of Vishay Siliconix 9204202EA Analog Switches & Multiplexers ICs applications.
- Avionics and Military Systems
- Transmit
- SONET
- High speed data transmission line cards
- Automotive applications
- High reliability control systems
- Channelized and Unchannelized DS3 applications
- Imaging
- Microprocessor Controlled Analog Systems
- Battery Powered Instruments
