Parameters |
Package / Case |
Aluminum |
Surface Mount |
NO |
Terminal Shape |
WIRE |
Mounting Feature |
THROUGH HOLE MOUNT |
Number of Pins |
2 |
Tolerance |
20% |
JESD-609 Code |
e4 |
Number of Terminations |
2 |
Termination |
Radial |
ECCN Code |
EAR99 |
Terminal Finish |
Silver (Ag) |
Max Operating Temperature |
105°C |
Min Operating Temperature |
-55°C |
Additional Feature |
ESR IS MEASURED AT 100 KHZ-300 KHZ |
Capacitance |
47μF |
Voltage - Rated DC |
20V |
Packing Method |
BULK |
Lead Pitch |
600μm |
ESR (Equivalent Series Resistance) |
36mOhm |
Polarity |
POLARIZED |
Ripple Current |
2.21A |
Tan Delta |
0.07 |
Current - Leakage |
94μA |
Diameter |
8mm |
Length |
5mm |
RoHS Status |
RoHS Compliant |
The capacitance can run at the range of 47μF.
20% are used to determine the tolerance of this capacitor. It is contained in a package of Aluminum. The type of the 94SP476X0020EBP capacitor Vishay 94SP476X0020EBP is suitable to conduct the ripple current at 2.21A. 94SP476X0020EBP Capacitor The typical values of Voltage - Rated DC are 20V. There are 2 terminals embeded in 94SP476X0020EBP Capacitor. It has Radial terminations in total. The part is packaged by BULK. This device's minimum working temperature must not be less than -55°C. It's recommended that you utilize it when the temperature is below 105°C. There are 2 pins available in the part.
Series
Capacitance: 47μF
Tolerance: 20%
Package / Case: Aluminum
ESR IS MEASURED AT 100 KHZ-300 KHZ
There are great quantities of applications of 94SP476X0020EBP Aluminum Polymer Capacitors.
Typically, 94SP476X0020EBP is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.
- To reduce power noise & signal noise
- Signal decoupling & power bypass
- Frequency Converters
- Motor Control
- PFC
- DC Link
- DC/DC, DC/AC, and AC/AC converters
- Spot Welding
- Power Factor Correction
- Bypassing Noise Filtering