94SP567X0004EBP
| Parameters | |
|---|---|
| Package / Case | Radial |
| Surface Mount | NO |
| Terminal Shape | WIRE |
| Mounting Feature | THROUGH HOLE MOUNT |
| Dielectric Material | ALUMINUM (SOLID POLYMER) |
| Packaging | Bulk |
| Tolerance | 20% |
| JESD-609 Code | e4 |
| Number of Terminations | 2 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 105°C |
| Min Operating Temperature | -55°C |
| Additional Feature | ESR IS MEASURED AT 100 KHZ-300 KHZ |
| Capacitance | 560μF |
| Voltage - Rated DC | 4V |
| Terminal Pitch | 3.5mm |
| Lead Pitch | 600μm |
| Capacitor Type | ALUMINUM ELECTROLYTIC CAPACITOR |
| ESR (Equivalent Series Resistance) | 14mOhm |
| Polarity | POLARIZED |
| Rated (DC) Voltage (URdc) | 4V |
| Lead Diameter | 600 μm |
| Ripple Current | 4.08A |
| Life (Hours) | 1000 hours |
| Tan Delta | 0.08 |
| Current - Leakage | 224μA |
| Length | 10.5mm |
| RoHS Status | RoHS Compliant |
The capacitance can run at the range of 560μF.
20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial. This capacitor is accessible in the Bulk packaging. The type of the 94SP567X0004EBP capacitor Vishay 94SP567X0004EBP is suitable to conduct the ripple current at 4.08A. 94SP567X0004EBP Capacitor The typical values of Voltage - Rated DC are 4V. There are 2 terminals embeded in 94SP567X0004EBP Capacitor. The dielectric materials are defined as ALUMINUM (SOLID POLYMER). This device's minimum working temperature must not be less than -55°C. It's recommended that you utilize it when the temperature is below 105°C. The capacitor type can be sorted using ALUMINUM ELECTROLYTIC CAPACITOR.
Series
Capacitance: 560μF
Tolerance: 20%
Package / Case: Radial
Packaging: Bulk
ESR IS MEASURED AT 100 KHZ-300 KHZ
There are great quantities of applications of 94SP567X0004EBP Aluminum Polymer Capacitors.
Typically, 94SP567X0004EBP is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.
- DC/DC, DC/AC, and AC/AC converters
- Flashtube Ignition
- Bypassing Noise Filtering
- To reduce power noise & signal noise
- Motor Start
- Frequency Converters
- Spot Welding
- Voltage Doubling
- UPS Buffering
- Smoothing Noise Filtering
