952906AGLFT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 48 |
| Packaging | Tape and Reel |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | Clock Generators |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Pin Count | 48 |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 2 |
| Temperature Grade | COMMERCIAL |
| Number of Circuits | 1 |
| Max Supply Voltage | 3.465V |
| Min Supply Voltage | 3.135V |
| Nominal Supply Current | 350mA |
| uPs/uCs/Peripheral ICs Type | CLOCK GENERATOR, PROCESSOR SPECIFIC |
| Frequency (Max) | 460MHz |
| Input | Crystal |
| Primary Clock/Crystal Frequency-Nom | 14.31818MHz |
| PLL | Yes |
| Output Clock Frequency-Max | 400MHz |
| Length | 12.5mm |
| Width | 6.1mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
952906AGLFT Overview
There is a Tape and Reel package that contains it. An accompanying case is included. In it, there are 48 terminations. There is 3.3V voltage provided by the part. Run 260 using the peak reflow temperature of this part. Clock program contains a total of CLOCK GENERATOR, PROCESSOR SPECIFIC peripheral ICs, uPs, and uCs. There are 1 on the device. There is a maximum frequency for normaloperation of 460MHz. Clock output frequencies should not exceed 400MHz. Of the part, there are 2006 publications. Mounting it with Surface Mount is recommended. On this device, there are 48 pins. Circuits application includes 48 pins. Temperatures below 0°C are not permitted for this device. Temperatures below 70°C are recommended for operation. Keeping the supply voltage at 3.3V is recommended. This device belongs to the Clock Generators family. As far as supply voltage is concerned, this part is used at 3.465V. Circuits application is imperative that the device is always supplied wCircuits applicationh voltage greater than 3.135V. This element contains 2 elements.
952906AGLFT Features
Peak Reflow Temperature (Cel): 260
uPs/uCs/Peripheral ICs Type of CLOCK GENERATOR, PROCESSOR SPECIFIC
Include 1 Circuits
with 48 Pins
operate supply voltage at the range of 3.3V
952906AGLFT Applications
There are a lot of Integrated Device Technology (IDT) 952906AGLFT application specific timer?applications.
- 1 GbE and 10 GbE
- Storage area networks
- Broadcast video/audio timing
- Communications
- OTN Muxponders and Transponders
- XO replacement
- Audio/video equipment, gaming
- GbE/10 GbE/100 GbE Synchronous Ethernet (ITU-T G.8262)
- Audio/video equipment, gaming
- Test and Measurement
