9DB803DGLF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 48 |
| Weight | 420.990418mg |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | Clock Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 48 |
| Number of Outputs | 8 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Number of Circuits | 1 |
| Max Supply Voltage | 3.465V |
| Min Supply Voltage | 3.135V |
| Operating Supply Current | 175mA |
| Nominal Supply Current | 200mA |
| Frequency (Max) | 400MHz |
| Family | 9DB |
| Output Characteristics | 3-STATE |
| Input | HCSL |
| Logic IC Type | PLL BASED CLOCK DRIVER |
| PLL | Yes |
| Same Edge Skew-Max (tskwd) | 0.05 ns |
| Length | 12.5mm |
| Width | 6.1mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
9DB803DGLF Overview
An accompanying case is included. There are 48 terminations in it. The part provides a voltage of 3.3V volts. Run 260 using the peak reflow temperature of this part. A device with 1 has been detected. normaloperation has a maximum frequency of 400MHz. Currently, there are 2006 publications of the part. The Surface Mount mounting method is recommended. 48 pins are on the device. The board has 48 pins. Temperatures below 0°C are not acceptable for this device. The operating temperature should be less than 70°C. Circuits application is recommended to keep the supply voltage at 3.3V volts. Circuits application is a member of the Clock Drivers family. In this case, it is possible for the device to maintain 8 outputs. As far as supply voltage is concerned, this part is used at 3.465V. For the device to maintain a supply voltage above 3.135V. There are parts related to the 9DB family that you can search for based on that family. The logic IC type is PLL BASED CLOCK DRIVER. This part can operate supply current at 175mA.
9DB803DGLF Features
Peak Reflow Temperature (Cel): 260
Include 1 Circuits
with 48 Pins
operate supply voltage at the range of 3.3V
Logic IC Type: PLL BASED CLOCK DRIVER
9DB803DGLF Applications
There are a lot of Integrated Device Technology (IDT) 9DB803DGLF application specific timer?applications.
- BBU (Baseband Unit)
- 1 GbE and 10 GbE
- DU (Distribution Unit)
- Multi-function Printer
- Ethernet Switches, Routers
- Switches/routers
- GbE/10 GbE/100 GbE Synchronous Ethernet (ITU-T G.8262)
- Any-frequency clock conversion
- Storage area networks
- OTN Muxponders and Transponders
