9DBU0241AKLF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | QFN |
| Number of Pins | 24 |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 24 |
| Number of Outputs | 2 |
| Operating Supply Voltage | 1.5V |
| Temperature Grade | COMMERCIAL |
| Number of Circuits | 1 |
| Max Supply Voltage | 1.575V |
| Min Supply Voltage | 1.425V |
| Power Dissipation-Max | 35mW |
| Operating Supply Current | 6mA |
| Frequency (Max) | 167MHz |
| Family | 9DBU |
| Input | HCSL |
| Logic IC Type | PLL BASED CLOCK DRIVER |
| PLL | Yes |
| Max Duty Cycle | 55 % |
| Same Edge Skew-Max (tskwd) | 0.05 ns |
| Height | 900μm |
| Length | 4mm |
| Width | 4mm |
| Thickness | 900μm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
9DBU0241AKLF Overview
In order to ensure the safety and security of the product, it is packaged in a case with a QFN-serial number. This termination has 24 terminations. Parts provide 1.5V volts. In order to run 260, the peak reflow temperature of this part is taken into account. There has been a detection of a device with 1. normaloperation has a frequency of 167MHz. There have been 2006 publications of this part. The Surface Mount mount is recommended. There are 24 pins on the device. A total of 24 pins are included. A minimum working temperature of 0°C must be maintained for this device. The operating temperature should be less than 70°C. 1.5V is the recommended supply voltage. In this device, 2 outputs can be maintained. As far as supply voltage is concerned, this part is used at 1.575V. Circuits application is imperative that the device is always supplied wCircuits applicationh voltage greater than 1.425V. There are parts related to the 9DBU family that you can search for based on that family. Logic ICs of type PLL BASED CLOCK DRIVER are used. There is a typical supply current of 6mA for this DAC.
9DBU0241AKLF Features
Peak Reflow Temperature (Cel): 260
Include 1 Circuits
with 24 Pins
operate supply voltage at the range of 1.5V
Logic IC Type: PLL BASED CLOCK DRIVER
9DBU0241AKLF Applications
There are a lot of Integrated Device Technology (IDT) 9DBU0241AKLF application specific timer?applications.
- GbE/10 GbE/100 GbE Synchronous Ethernet (ITU-T G.8262)
- Servers, storage
- Broadcast video/audio timing
- Storage area networks
- Test and Measurement
- Network Attached Storage
- Print Imaging
- XO replacement
- Audio/video equipment, gaming
- OTN Muxponders and Transponders
