9DBU0431AKILF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Number of Pins | 32 |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 32 |
| Number of Outputs | 2 |
| Operating Supply Voltage | 1.5V |
| Temperature Grade | INDUSTRIAL |
| Number of Circuits | 1 |
| Max Supply Voltage | 1.575V |
| Min Supply Voltage | 1.425V |
| Power Dissipation-Max | 45mW |
| Operating Supply Current | 6mA |
| Frequency (Max) | 167MHz |
| Family | 9DBU |
| Input | HCSL |
| Logic IC Type | PLL BASED CLOCK DRIVER |
| PLL | Yes |
| Max Duty Cycle | 55 % |
| Same Edge Skew-Max (tskwd) | 0.05 ns |
| Height | 1mm |
| Length | 5mm |
| Width | 5mm |
| Thickness | 900μm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
9DBU0431AKILF Overview
There are 32 terminations in it. In this part, the voltage is 1.5V. 260 runs using this part's peak reflow temperature. The device contains 1. There is a maximum frequency for normaloperation of 167MHz. The part has been published 2006 times. The Surface Mount mounting method is recommended. A device with 32 pins is designed. Circuits application has 32 pins. Minimum working temperature for this device must not be less than -40°C. Under 85°C degrees Celsius, the operating temperature should be maintained. Circuits application is recommended to keep the supply voltage at 1.5V volts. In this device, 2 outputs can be maintained. Voltage 1.575V is applied to this part. Circuits application is necessary for the device to have a supply voltage greater than 1.425V. Circuits application is possible to search for related parts based on the 9DBU family. Circuits application uses PLL BASED CLOCK DRIVER logic IC type. A supply current of 6mA is usually sufficient to operate this DAC.
9DBU0431AKILF Features
Peak Reflow Temperature (Cel): 260
Include 1 Circuits
with 32 Pins
operate supply voltage at the range of 1.5V
Logic IC Type: PLL BASED CLOCK DRIVER
9DBU0431AKILF Applications
There are a lot of Integrated Device Technology (IDT) 9DBU0431AKILF application specific timer?applications.
- Audio/video
- Print Imaging
- Test and Measurement
- Printers, scanners, projectors
- Broadcast video
- Broadcast Video
- Test and Measurement
- Small Cells, Mobile Backhaul/Fronthaul
- Any-frequency clock conversion
- Network Attached Storage
