9DBU0531AKILF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Number of Pins | 32 |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.5V |
| Pin Count | 32 |
| Number of Outputs | 2 |
| Operating Supply Voltage | 1.5V |
| Temperature Grade | INDUSTRIAL |
| Number of Circuits | 1 |
| Max Supply Voltage | 1.575V |
| Min Supply Voltage | 1.425V |
| Power Dissipation-Max | 35mW |
| Operating Supply Current | 3mA |
| Frequency (Max) | 167MHz |
| Family | 9DBU |
| Input | HCSL |
| Logic IC Type | LOW SKEW CLOCK DRIVER |
| PLL | No |
| Max Duty Cycle | 55 % |
| Same Edge Skew-Max (tskwd) | 0.06 ns |
| Height | 1mm |
| Length | 5mm |
| Width | 5mm |
| Thickness | 900μm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
9DBU0531AKILF Overview
Clock program contains 32 terminations. Clock program provides 1.5V volts. The peak reflow temperature is used to run 260. As of right 1w, the device has 1. normaloperation has a frequency of 167MHz. A total of 2006 parts have been published. The Surface Mount mounting method is recommended. 32 pins are provided on the device. The board contains 32 pins. Temperatures below -40°C are not acceptable for this device. Temperatures below 85°C degrees Celsius should be used. Circuits application is recommended that the supply voltage remain at 1.5V. In this case, it is possible for the device to maintain 2 outputs. Voltage 1.575V is applied to this part. A supply voltage greater than 1.425V must be maintained on the device. Circuits application is possible to search for related parts based on the 9DBU family of parts. Logic IC type LOW SKEW CLOCK DRIVER is used. A supply current of 3mA is usually sufficient to operate this DAC.
9DBU0531AKILF Features
Peak Reflow Temperature (Cel): 260
Include 1 Circuits
with 32 Pins
operate supply voltage at the range of 1.5V
Logic IC Type: LOW SKEW CLOCK DRIVER
9DBU0531AKILF Applications
There are a lot of Integrated Device Technology (IDT) 9DBU0531AKILF application specific timer?applications.
- Communications
- Storage area networks
- Wireless Access Point
- Network Attached Storage
- BBU (Baseband Unit)
- Small Cells, Mobile Backhaul/Fronthaul
- Residential gateways
- Broadcast Video
- Processor and FPGA clocking
- Carrier Ethernet switches
