9DBU0631AKLF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Number of Pins | 40 |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 40 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.5V |
| Terminal Pitch | 0.4mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 40 |
| Number of Outputs | 6 |
| Operating Supply Voltage | 1.5V |
| Temperature Grade | COMMERCIAL |
| Number of Circuits | 1 |
| Max Supply Voltage | 1.575V |
| Min Supply Voltage | 1.425V |
| Power Dissipation-Max | 47mW |
| Operating Supply Current | 8mA |
| Frequency (Max) | 167MHz |
| Family | 9DBU |
| Input | HCSL |
| Logic IC Type | PLL BASED CLOCK DRIVER |
| PLL | Yes |
| Max Duty Cycle | 55 % |
| Same Edge Skew-Max (tskwd) | 0.075 ns |
| Height | 900μm |
| Length | 5mm |
| Width | 5mm |
| Thickness | 900μm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
9DBU0631AKLF Overview
40 terminations are found in it. Clock program provides 1.5V volts. 260 runs using this part's peak reflow temperature. A device with 1 has been detected. In a normaloperation, there is 167MHz maximum frequency. There are 2006 published parts for this part. Circuits application is recommended to mount Circuits application wCircuits applicationh Surface Mount. 40 pins are present on the device. The board has 40 pins. Minimum working temperature for this device must not be less than 0°C. Temperatures below 70°C should be used. A 1.5V supply voltage should be maintained. This device can handle 6 outputs on it. As far as supply voltage is concerned, this part is used at 1.575V. For the device to maintain a supply voltage above 1.425V. In order to find related parts, you can search based on the 9DBU family. A logic IC of type PLL BASED CLOCK DRIVER is used in it. There is a typical supply current of 8mA for this DAC.
9DBU0631AKLF Features
Peak Reflow Temperature (Cel): 260
Include 1 Circuits
with 40 Pins
operate supply voltage at the range of 1.5V
Logic IC Type: PLL BASED CLOCK DRIVER
9DBU0631AKLF Applications
There are a lot of Integrated Device Technology (IDT) 9DBU0631AKLF application specific timer?applications.
- Switches/routers
- Communications
- Ethernet Switches, Routers
- GbE/10 GbE/100 GbE Synchronous Ethernet (ITU-T G.8262)
- HDTV, DVD/Blu-ray, set-top box
- Carrier Ethernet switches
- DU (Distribution Unit)
- Printers, scanners, projectors
- Processor and FPGA clocking
- MSAN/DSLAM/PON
