9FG430AFILFT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | SSOP |
| Number of Pins | 28 |
| Packaging | Tape and Reel |
| Published | 2011 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 28 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Number of Circuits | 1 |
| Max Supply Voltage | 3.465V |
| Min Supply Voltage | 3.135V |
| Nominal Supply Current | 120mA |
| Frequency (Max) | 400MHz |
| Input | Clock |
| Primary Clock/Crystal Frequency-Nom | 25MHz |
| PLL | Yes |
| Length | 10.2mm |
| Width | 5.3mm |
| Thickness | 1.73mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
9FG430AFILFT Overview
The Tape and Reel package contains it. SSOP is included in the case. As far as terminations are concerned, there are 28. In this part, the voltage is 3.3V. This part's peak reflow temperature is utilized to run 260. On the device, there are 1. The maximum frequency for normaloperation is 400MHz. The part has been published 2011 times. Clock program is recommended that Clock program be mounted wClock programh Surface Mount. 28 pins are on the device. There are 28 pins 28 this board. Temperatures below -40°C are not acceptable for this device. Temperatures should not exceed 85°C. Ensure that the supply voltage is set to 3.3V. Voltage 3.465V is the supply voltage for this part. A supply voltage greater than 3.135V must be maintained on the device.
9FG430AFILFT Features
Peak Reflow Temperature (Cel): 260
Include 1 Circuits
with 28 Pins
operate supply voltage at the range of 3.3V
9FG430AFILFT Applications
There are a lot of Integrated Device Technology (IDT) 9FG430AFILFT application specific timer?applications.
- Fibre Channel, SAN
- Communications
- XO replacement
- Printers, scanners, projectors
- Carrier Ethernet switches
- DU (Distribution Unit)
- Network Attached Storage
- Test and Measurement
- Broadcast video
- eCPRI RRH (Remote Radio Head)
