9FGU0231AKLF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Number of Pins | 24 |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 24 |
| Number of Outputs | 2 |
| Operating Supply Voltage | 1.5V |
| Temperature Grade | COMMERCIAL |
| Number of Circuits | 1 |
| Operating Supply Current | 6.2mA |
| uPs/uCs/Peripheral ICs Type | CLOCK GENERATOR, PROCESSOR SPECIFIC |
| Frequency (Max) | 100MHz |
| Input | Crystal |
| Primary Clock/Crystal Frequency-Nom | 27MHz |
| PLL | Yes |
| Max Duty Cycle | 55 % |
| Length | 4mm |
| Width | 4mm |
| Thickness | 900μm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
9FGU0231AKLF Overview
Clock program has 24 terminations. Voltage 1.5V is provided by the part. Using the part's peak reflow temperature, operation 260 is performed. This device has a total of CLOCK GENERATOR, PROCESSOR SPECIFIC uPs/uCs/Peripheral IC. In the device, there are 1. normaloperation can occur at a frequency of 100MHz. There have been 2006 publications of this part. The Surface Mount mount is recommended. 24 pins are provided on the device. Circuits application has 24 pins. The minimum working temperature of this device cannot be lower than 0°C. Under 70°C degrees Celsius, the operating temperature should be maintained. 1.5V is the recommended supply voltage. 2 outputs are possible on the device. The supply current of this DAC is typically 6.2mA.
9FGU0231AKLF Features
Peak Reflow Temperature (Cel): 260
uPs/uCs/Peripheral ICs Type of CLOCK GENERATOR, PROCESSOR SPECIFIC
Include 1 Circuits
with 24 Pins
operate supply voltage at the range of 1.5V
9FGU0231AKLF Applications
There are a lot of Integrated Device Technology (IDT) 9FGU0231AKLF application specific timer?applications.
- Handheld Instrumentation
- Servers, storage
- GbE/10 GbE/100 GbE Synchronous Ethernet (ITU-T G.8262)
- Any-frequency clock conversion
- Wireless Infrastructure
- Telecom line cards
- GbE/10 GbE/100 GbE Synchronous Ethernet (ITU-T G.8262)
- 10/40/100G network line cards
- PCI Express 2.0/3.0
- XO replacement
