9FGV0841AKILF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | 100 |
| Number of Pins | 48 |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 48 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Clock Generators |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.4mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 48 |
| Number of Outputs | 9 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Temperature Grade | INDUSTRIAL |
| Number of Circuits | 1 |
| Operating Supply Current | 12mA |
| uPs/uCs/Peripheral ICs Type | CLOCK GENERATOR, PROCESSOR SPECIFIC |
| Supply Current-Max | 35mA |
| Frequency (Max) | 100MHz |
| Input | Crystal |
| Primary Clock/Crystal Frequency-Nom | 27MHz |
| PLL | Yes |
| Output Clock Frequency-Max | 25MHz |
| Max Duty Cycle | 55 % |
| Length | 6mm |
| Width | 6mm |
| Thickness | 900μm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
9FGV0841AKILF Overview
There is a case with 100 included. This termination has 48 terminations. In this part, the voltage is 1.8V. 260 runs using this part's peak reflow temperature. This device has a total of CLOCK GENERATOR, PROCESSOR SPECIFIC uPs/uCs/Peripheral IC. In the device, there are 1. There is a maximum frequency for normaloperation of 100MHz. Clock program is important that the clock's output frequency does not exceed 25MHz. A total of 2006 parts have been published. Clock program is recommended that Clock program be mounted wClock programh Surface Mount. On this device, there are 48 pins. The board has 48 pins. A minimum working temperature of -40°C must be maintained for this device. There should be a temperature below 85°C during operation. You should maintain a voltage of 1.8V for the supply. Devices in this family belong to the Clock Generators series. 9 outputs are possible on the device. Supply current can be set to 12mA for this part. Current supply is limited to 35mA.
9FGV0841AKILF Features
Peak Reflow Temperature (Cel): 260
uPs/uCs/Peripheral ICs Type of CLOCK GENERATOR, PROCESSOR SPECIFIC
Include 1 Circuits
with 48 Pins
operate supply voltage at the range of 1.8V
9FGV0841AKILF Applications
There are a lot of Integrated Device Technology (IDT) 9FGV0841AKILF application specific timer?applications.
- Audio/video equipment, gaming
- Routers
- Small Cells, Mobile Backhaul/Fronthaul
- Laser range finder
- Audio/video
- Broadcast Video
- Storage area networks
- Carrier Ethernet switches
- 10/40/100G network line cards
- Broadcast video/audio timing
