9LPRS436CGLF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 48 |
| Published | 2011 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | 0°C |
| Subcategory | Clock Generators |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 48 |
| Number of Outputs | 14 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 4 |
| Temperature Grade | OTHER |
| Number of Circuits | 1 |
| Max Supply Voltage | 3.465V |
| Min Supply Voltage | 3.135V |
| Operating Supply Current | 115mA |
| Nominal Supply Current | 100mA |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR CIRCUIT |
| Frequency (Max) | 166.67MHz |
| Input | Crystal |
| PLL | Yes |
| Length | 12.5mm |
| Width | 6.1mm |
| Thickness | 1mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
9LPRS436CGLF Overview
TSSOP comes with the case. There are 48 terminations in it. Voltage 3.3V is provided by the part. In order to run 260, the peak reflow temperature of this part is taken into account. This device contains MICROPROCESSOR CIRCUIT uPs, uCs, or peripheral ICs. As of right 1w, the device has 1. The maximum frequency for normaloperation is 166.67MHz. There have been 2011 publications of this part. A Surface Mount mounting is recommended. Devices with 48 pins are designed. There are 48 pins on it. Temperatures below 0°C are not acceptable for this device. Under 85°C degrees Celsius, the operating temperature should be maintained. 3.3V is the recommended supply voltage. This device belongs to the Clock Generators family. A 14 output can be maintained on the device. In terms of supply voltage, this part is used under 3.465V. A supply voltage greater than 3.135V is needed to keep the device operating. The supply current of this part can be set to 115mA. 4 elements make up its total.
9LPRS436CGLF Features
Peak Reflow Temperature (Cel): 260
uPs/uCs/Peripheral ICs Type of MICROPROCESSOR CIRCUIT
Include 1 Circuits
with 48 Pins
operate supply voltage at the range of 3.3V
9LPRS436CGLF Applications
There are a lot of Integrated Device Technology (IDT) 9LPRS436CGLF application specific timer?applications.
- Wireless Access Point
- Printers
- Telecom line cards
- Fibre Channel, SAN
- Handheld Instrumentation
- Audio/video equipment, gaming
- Audio/video equipment, gaming
- 10/40/100G network line cards
- Broadcast video/audio timing
- Any-frequency clock conversion
