A1698LUBTN-FWPE-T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 2-SIP Module |
| Surface Mount | NO |
| Operating Temperature | -40°C~150°C TA |
| Packaging | Cut Tape (CT) |
| Published | 2015 |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 2 |
| Additional Feature | SEATED HT-CALCULATED |
| HTS Code | 8542.39.00.01 |
| Technology | Hall Effect |
| Voltage - Supply | 4V~24V |
| Terminal Position | SINGLE |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 12V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| JESD-30 Code | S-PSIP-T2 |
| Function | Special Purpose |
| Output Type | Current Source |
| Polarity | South Pole |
| Supply Voltage-Max (Vsup) | 24V |
| Supply Voltage-Min (Vsup) | 4V |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Polarization | South Pole |
| Max Supply Current | 16mA |
| Sensing Method | Hall Effect |
| Test Condition | -40°C ~ 150°C |
| Sensing Range | 60% Trip, 40% Release |
| Height Seated (Max) | 4.6mm |
| Length | 4mm |
| Width | 1.5mm |
| RoHS Status | ROHS3 Compliant |
A1698LUBTN-FWPE-T Overview
The magnetic switch is packaged in the Cut Tape (CT) to prevent damage. In order to protect the switches from damage, they are packaged in 2-SIP Module packages. Switches of this type can deliver currents up to 16mA. It contains 2 terminations. In a working switch, the maximum voltage should be 24V. In order to provide reliable performance, this switch normally supplies voltage 12V. In this case, the minimum voltage supplied by the magnetic switch can be 4V.
A1698LUBTN-FWPE-T Features
Packaging: Cut Tape (CT)
Moisture Sensitivity Level (MSL): 1 (Unlimited)
Supply Voltage: 4V~24V
Operating Temperature: -40°C~150°C TA
Mounting Type: Through Hole
2 Terminations
Output Type: Current Source
A1698LUBTN-FWPE-T Applications
There are a lot of Allegro MicroSystems A1698LUBTN-FWPE-T Magnetic Switches applications.
- Geomagnetic field measurements
- Compressor speed
- Transmission
- Flow-rate sensing
- Factory automation
- Encoders
- Gear reducer RPM
- RPM measurement
- Tachometers/counters
- Position and limit sensing
