banner_page

A2557EB-T

5V Bipolar PMIC A2557 16 Pin 5V 16-PowerDIP (0.300, 7.62mm)


  • Manufacturer: Allegro MicroSystems
  • Nocochips NO: 26-A2557EB-T
  • Package: 16-PowerDIP (0.300, 7.62mm)
  • Datasheet: PDF
  • Stock: 571
  • Description: 5V Bipolar PMIC A2557 16 Pin 5V 16-PowerDIP (0.300, 7.62mm) (Kg)

Details

Tags

Parameters
Mount Through Hole
Mounting Type Through Hole
Package / Case 16-PowerDIP (0.300, 7.62mm)
Number of Pins 16
Operating Temperature -40°C~85°C TA
Packaging Tube
Published 2009
JESD-609 Code e3
Feature Status Flag
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
ECCN Code EAR99
Terminal Finish Matte Tin (Sn)
Subcategory Peripheral Drivers
Terminal Position DUAL
Number of Functions 4
Supply Voltage 5V
Reach Compliance Code unknown
Base Part Number A2557
Pin Count 16
Number of Outputs 4
Qualification Status Not Qualified
Output Type Bipolar
Max Output Current 500mA
Supply Voltage-Max (Vsup) 5.25V
Power Supplies 5V
Interface On/Off
Output Configuration Low Side
Voltage - Supply (Vcc/Vdd) 4.75V~5.25V
Input Type Non-Inverting
Switch Type Relay, Solenoid Driver
Output Current per Channel 300mA
Ratio - Input:Output 1:1
Voltage - Load 60V Max
Driver Number of Bits 4
Fault Protection Current Limiting (Fixed), Over Temperature
Turn On Time 10 μs
Output Peak Current Limit-Nom 0.5A
Turn Off Time 10 μs
Built-in Protections TRANSIENT; OVER CURRENT; THERMAL
Output Current Flow Direction SINK
Height Seated (Max) 5.33mm
Length 19.05mm
Width 7.62mm
RoHS Status ROHS3 Compliant

A2557EB-T Overview


As a result, it is packaged in the form of a Tube.In the 16-PowerDIP (0.300, 7.62mm) package, it is included.This LED driving board is mounted using the mounting type Through Hole.The switch type of this switch is Relay, Solenoid Driver.To ensure reliable operation, the temperature should be set to -40°C~85°C TA.As a default, the output is set to 4.A supply voltage of 4.75V~5.25V is required for it to operate.The maximum output voltage of this LED driver is Bipolar volts.As far as features are concerned, the LED driving board has Status Flag.It belongs to the family A2557.It contains 16 terminations.16 pins are used for operation.As far as functions are concerned, the lighting driver has 4.The maximum output current drops to 500mA in order to meet the operation criteria.With a supply voltage of 5V, high efficiency is possible.This lighting driver is mounted in the way of Through Hole.The LED driving board is equipped with a total of 16 pins.It is self-contained in an econtainer with a capacity of Peripheral Drivers.This LED driver is configured to have a maximum supply voltage of 5.25V (Vsup).A 5V power supply is used by the part.

A2557EB-T Features


Supplied from 5V

A2557EB-T Applications


There are a lot of Allegro MicroSystems A2557EB-T Power Switches ICs applications.

  • Hot Swap
  • Hard Disk Drives
  • Notebook PC
  • USB3.1 Power Delivery
  • Storage Drives
  • Handheld Devices
  • Solid-State Drives
  • Wireless Headsets
  • Low Voltage I/O System Power
  • USB Protection

Write a review

Note: HTML is not translated!
    Bad           Good