A2919SB
| Parameters | |
|---|---|
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 24-PowerDIP (0.300, 7.62mm) |
| Operating Temperature | -20°C~150°C TJ |
| Packaging | Bulk |
| Published | 1998 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | TIN LEAD |
| Applications | General Purpose |
| Additional Feature | ALSO REQUIRES 10V TO 45V VBB SUPPLY |
| HTS Code | 8542.39.00.01 |
| Subcategory | Motion Control Electronics |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | A2919 |
| JESD-30 Code | R-PDIP-T24 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Interface | Parallel |
| Analog IC - Other Type | STEPPER MOTOR CONTROLLER |
| Output Configuration | Half Bridge (4) |
| Current - Output | 750mA |
| Supply Current-Max (Isup) | 50mA |
| Voltage - Load | 10V~45V |
| Motor Type - AC, DC | Brushed DC |
| Motor Type - Stepper | Bipolar |
| Step Resolution | 1/2, 1/4 |
| Height Seated (Max) | 5.33mm |
| Length | 31.875mm |
| Width | 7.62mm |
A2919SB Overview
Drivers controllers is designed with Bulk package.24-PowerDIP (0.300, 7.62mm)cases are included with the part.Drivers controllers is recommended to mount the part by Through Hole.Drivers controllers is fDrivers controllersting for the component connected in General Purpose.This device is capable of supplying voltages up to 4.75V~5.25V volts.A range of -20°C~150°C TJis available for operating temperature.In this case, the motor type is Brushed DC.This part offers 24terminations.If the voltage is applied to the load at the rate of [0], the load will be affected.Drivers controllers is recommended that this amplifier be run at 5V.The recommended way to mount it is Through Hole.Maintain the current output of the part at 750mA volts.The device utilizes the IC STEPPER MOTOR CONTROLLERwhich is an analog IC.This can be determined by looking at the A2919 part number.This is part of the Motion Control Electronics series.There is also a characteristic ALSO REQUIRES 10V TO 45V VBB SUPPLYassociated with it.
A2919SB Features
Applications : General Purpose
Load voltage across the chip 10V~45V
base on A2919 number
Additional Feature: ALSO REQUIRES 10V TO 45V VBB SUPPLY
A2919SB Applications
There are a lot of Allegro MicroSystems A2919SB motor drivers applications.
- Footwell lighting
- Brake lights
- Scanning equipment
- Telltale lights
- Industrial lighting
- Automotive instrumentation
- High brightness LED lighting
- A cross between entertainment
- parking lights
- Industrial high-bay lights
