A2919SLB-T
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Operating Temperature | -20°C~150°C TJ |
| Packaging | Bulk |
| Published | 2010 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Applications | General Purpose |
| Additional Feature | ALSO REQUIRES 10V TO 45V VBB SUPPLY |
| HTS Code | 8542.39.00.01 |
| Subcategory | Motion Control Electronics |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | A2919 |
| JESD-30 Code | R-PDSO-G24 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Interface | Parallel |
| Analog IC - Other Type | STEPPER MOTOR CONTROLLER |
| Output Configuration | Half Bridge (4) |
| Current - Output | 750mA |
| Supply Current-Max (Isup) | 50mA |
| Voltage - Load | 10V~45V |
| Motor Type - AC, DC | Brushed DC |
| Motor Type - Stepper | Bipolar |
| Step Resolution | 1/2, 1/4 |
| Height Seated (Max) | 2.65mm |
| Length | 15.4mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
A2919SLB-T Overview
The package is designed with [0].The part is packged with 24-SOIC (0.295, 7.50mm Width) case.Ideally, the part should be mounted by Surface Mount.For the component connected to [0], it is suitable.The device is capable of supplying a voltage of 4.75V~5.25V volts.There is a temperature range of -20°C~150°C TJin which this device operates.There is a motor type Brushed DCassociated with this motor type.There are 24 terminations available on this part.If the voltage is applied to the load at the rate of [0], the load will be affected.Drivers controllers is recommended that this amplifier be run at 5V.The output current should remain at 750mA.A STEPPER MOTOR CONTROLLERanalog integrated circuit is used in the device.Using the A2919part number, it is located.Drivers controllers belongs to the Motion Control Electronics series.Also, it is characterized by a ALSO REQUIRES 10V TO 45V VBB SUPPLY.
A2919SLB-T Features
Applications : General Purpose
Load voltage across the chip 10V~45V
base on A2919 number
Additional Feature: ALSO REQUIRES 10V TO 45V VBB SUPPLY
A2919SLB-T Applications
There are a lot of Allegro MicroSystems A2919SLB-T motor drivers applications.
- Charge pump circuits
- Large format LED backlighting
- Large outdoor LED display
- Lighting for health and wellbeing
- Tunnel lights
- Telltale lights
- CHMSL (center high-mount stop lamps)
- Arena lighting
- Camera-enabled smartphones
- Landscape lighting
