A2919SLBTR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Operating Temperature | -20°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | TIN LEAD |
| Applications | General Purpose |
| Additional Feature | ALSO REQUIRES 10V TO 45V VBB SUPPLY |
| HTS Code | 8542.39.00.01 |
| Subcategory | Motion Control Electronics |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | A2919 |
| JESD-30 Code | R-PDSO-G24 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Interface | Parallel |
| Analog IC - Other Type | STEPPER MOTOR CONTROLLER |
| Output Configuration | Half Bridge (4) |
| Current - Output | 750mA |
| Supply Current-Max (Isup) | 50mA |
| Voltage - Load | 10V~45V |
| Motor Type - AC, DC | Brushed DC |
| Motor Type - Stepper | Bipolar |
| Step Resolution | 1/2, 1/4 |
| Height Seated (Max) | 2.65mm |
| Length | 15.4mm |
| Width | 7.5mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
A2919SLBTR Overview
This package is designed to work with [0].The part is packged with 24-SOIC (0.295, 7.50mm Width) case.Drivers controllers is recommended to mount the part by Surface Mount.I believe it would be suitable for the component connected to General Purpose.There is a possibility of providing 4.75V~5.25Vvolts through the device.Operation temperature ranges from -20°C~150°C TJ.Drivers controllers is possible to classify the motor type as Brushed DC.This part has 24termination options.A voltage of 10V~45Vcan be applied to the load.Drivers controllers is important to note that this amplifier should be operated at the 5Vsetting.The recommended way to mount it is Surface Mount.Maintain a current of 750mA for the part output.An analog IC with the model number STEPPER MOTOR CONTROLLERis employed in the device.This can be determined by looking at the A2919 part number.Drivers controllers is part of the series [0].Controller ic has also been assigned the characteristic [0].
A2919SLBTR Features
Applications : General Purpose
Load voltage across the chip 10V~45V
base on A2919 number
Additional Feature: ALSO REQUIRES 10V TO 45V VBB SUPPLY
A2919SLBTR Applications
There are a lot of Allegro MicroSystems A2919SLBTR motor drivers applications.
- Commercial office
- Indicator
- Street lights
- High power LED street light
- Industrial lighting
- Daytime running lights (DRLs)
- LCD displays
- RGB and monochromatic LED drivers for signage and traffic signals
- Display LED backlighting
- Monitoring the energy that the luminaire uses
