A2919SLBTR-T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -20°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 1998 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Applications | General Purpose |
| Additional Feature | ALSO REQUIRES 10V TO 45V VBB SUPPLY |
| HTS Code | 8542.39.00.01 |
| Subcategory | Motion Control Electronics |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | A2919 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Interface | Parallel |
| Analog IC - Other Type | STEPPER MOTOR CONTROLLER |
| Output Configuration | Half Bridge (4) |
| Current - Output | 750mA |
| Supply Current-Max (Isup) | 50mA |
| Voltage - Load | 10V~45V |
| Motor Type - AC, DC | Brushed DC |
| Motor Type - Stepper | Bipolar |
| Step Resolution | 1/2, 1/4 |
| Height Seated (Max) | 2.65mm |
| Length | 15.4mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
A2919SLBTR-T Overview
The package is designed with [0].This part is packaged with a case of [0].The part should be mounted by Surface Mount.The component connected in General Purposematches it perfectly.The device is capable of supplying a voltage of 4.75V~5.25V volts.This device operates at a temperature of -20°C~150°C TJ.Motors can be classified as Brushed DC.The part supports 24terminations.If the voltage is applied to the load at the rate of [0], the load will be affected.In order to get the best performance from this amplifier, it should be run at 5V.The recommended way to mount it is Surface Mount.Keep the part output current at 750mA.A STEPPER MOTOR CONTROLLERanalog integrated circuit is employed in the device.According to the A2919part number, the part is found.A device with 24pins is available.Drivers controllers is part of the series [0].There is also a characteristic ALSO REQUIRES 10V TO 45V VBB SUPPLYassociated with it.
A2919SLBTR-T Features
Applications : General Purpose
Load voltage across the chip 10V~45V
base on A2919 number
Additional Feature: ALSO REQUIRES 10V TO 45V VBB SUPPLY
A2919SLBTR-T Applications
There are a lot of Allegro MicroSystems A2919SLBTR-T motor drivers applications.
- Camcorders
- High power LED street light
- Hidden coves in high-end residential settings
- Footwell lighting
- Infotainment backlighting
- Fog lamps
- Digital still cameras
- Telltale lights
- Charge pump circuits
- Building technology
