A2982ELW
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2009 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 8 |
| Supply Voltage | 35V |
| Terminal Pitch | 1.27mm |
| Base Part Number | A2982 |
| Pin Count | 20 |
| Number of Outputs | 8 |
| Output Type | Bipolar |
| Max Output Current | 500mA |
| Polarity | NPN, PNP |
| Supply Voltage-Min (Vsup) | 5V |
| Interface | On/Off |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Collector Emitter Voltage (VCEO) | 50V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5V~50V |
| Driver Number of Bits | 8 |
| Collector Emitter Saturation Voltage | 1.8V |
| Turn On Time | 2 μs |
| Output Peak Current Limit-Nom | 0.5A |
| Turn Off Time | 10 μs |
| Built-in Protections | TRANSIENT |
| Output Current Flow Direction | SOURCE |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
A2982ELW Overview
As a result, it is packaged in the form of a Tube.It is included with the 20-SOIC (0.295, 7.50mm Width) package as well.In this case, the LED driving board is mounted as Surface Mount.A General Purpose switch type is owned by it.It is best to set the temperature to -40°C~85°C TA to ensure reliable operation.The LED driver has 8 outputs.Operation is based on Not Required supply voltage.The maximum output voltage of this LED driver is Bipolar volts.It belongs to the family A2982.A total of 20 terminations have been found in it.For operation, 20 pins are used.It is important to note that the LED driving board has 8 functions.This operation requires the maximum output current to be decreased to 500mA.Using a voltage of 35V allows for high efficiency.The lighting driver is mounted in the way of Surface Mount.A total of 20 pins are included in this LED driver.A self-contained LED driver with a capacity of Peripheral Drivers is contained in an econtainer.In order for the lighting driver to operate normally, the supply voltage (Vsup) should be maintained above 5V.
A2982ELW Features
Supplied from 35V
A2982ELW Applications
There are a lot of Allegro MicroSystems A2982ELW Power Switches ICs applications.
- Hot Swap
- USB Ports/Hubs
- Notebook and Tablet Computers
- Portable Devices
- Hard Disk Drives
- Notebook PC
- Portable Video Game Players
- Set-top-box
- Handheld Devices
- PDAs
