A2982ELW-T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 8 |
| Supply Voltage | 35V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | A2982 |
| Pin Count | 20 |
| JESD-30 Code | R-PDSO-G20 |
| Number of Outputs | 8 |
| Qualification Status | Not Qualified |
| Output Type | Bipolar |
| Max Output Current | 500mA |
| Supply Voltage-Max (Vsup) | 50V |
| Supply Voltage-Min (Vsup) | 5V |
| Interface | On/Off |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5V~50V |
| Driver Number of Bits | 8 |
| Turn On Time | 2 μs |
| Output Peak Current Limit-Nom | 0.5A |
| Turn Off Time | 10 μs |
| Built-in Protections | TRANSIENT |
| Output Current Flow Direction | SOURCE |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
A2982ELW-T Overview
It's?packaged?in?the way?of?a?Tube.It's included in the 20-SOIC (0.295, 7.50mm Width) package.Surface Mount is the mounting type of the LED driver.The switch type of this switch is General Purpose.It is best to set the temperature to -40°C~85°C TA to ensure reliable operation.By default, it is set to output 8.Operation is based on Not Required supply voltage.There is a maximum output voltage of Bipolar volts.I believe it belongs to the A2982 family.A total of 20 terminations have been found in it.As far as functions are concerned, the lighting driver has 8.The maximum output current is reduced to 500mA to meet the operation criteria.It is possible to obtain high efficiency with a supply voltage of 35V.The lighting driver is mounted in the way of Surface Mount.In total, it has 20 pins.Self-contained in an econtainer with a capacity of Peripheral Drivers, this LED driver is self-contained.The maximum supply voltage for this lighting driver is set to 50V (Vsup).To maintain a normal operation, the supply voltage (Vsup) must be maintained above 5V.
A2982ELW-T Features
Supplied from 35V
A2982ELW-T Applications
There are a lot of Allegro MicroSystems A2982ELW-T Power Switches ICs applications.
- Wireless Modem Data Cards
- Hard Disk Drives
- Wearable Devices
- Notebook PC
- Set-Top Boxes
- Various applications equipped with buttons
- Hot-Swap Systems
- Handheld Devices
- Smart Phones, Feature Phones
- USB Ports/Hubs
