A2982ELWTR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 8 |
| Supply Voltage | 35V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | A2982 |
| Pin Count | 20 |
| JESD-30 Code | R-PDSO-G20 |
| Number of Outputs | 8 |
| Qualification Status | Not Qualified |
| Output Type | Bipolar |
| Max Output Current | 500mA |
| Supply Voltage-Max (Vsup) | 50V |
| Supply Voltage-Min (Vsup) | 5V |
| Interface | On/Off |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5V~50V |
| Driver Number of Bits | 8 |
| Turn On Time | 2 μs |
| Output Peak Current Limit-Nom | 0.5A |
| Turn Off Time | 10 μs |
| Built-in Protections | TRANSIENT |
| Output Current Flow Direction | SOURCE |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
A2982ELWTR Overview
It's?packaged?in?the way?of?a?Tape & Reel (TR).It's included in the 20-SOIC (0.295, 7.50mm Width) package.In this case, the LED driving board is mounted as Surface Mount.The switch type is General Purpose.It is recommended that the temperature be set to -40°C~85°C TA for reliable operation.It is possible to use 8 outputs in the lighting driver.The LED driving board operates at Not Required volts.Voltage output is Bipolar volts at maximum.As you can see, it comes from the A2982 family.A total of 20 terminations have been recorded.Currently, there are 8 functions associated with the lighting driver.The maximum output current drops to 500mA in order to meet the operation criteria.Using a voltage of 35V allows for high efficiency.Surface Mount is mounted in the way of this lighting driver.The LED driving board is equipped with a total of 20 pins.There is a Peripheral Drivers capacity container for this LED driver that is self-contained.The lighting driver is configured to have a maximum supply voltage of 50V (Vsup).In order for the lighting driver to operate normally, the supply voltage (Vsup) should be maintained above 5V.
A2982ELWTR Features
Supplied from 35V
A2982ELWTR Applications
There are a lot of Allegro MicroSystems A2982ELWTR Power Switches ICs applications.
- USB Ports/Hubs
- Gaming
- Portable GPS
- Hot Swap
- Hard Disk Drives
- Set-Top Boxes
- Wireless/Networking Cards
- Notebook PC
- Solid-State Drives
- Storage (HDDs, SSDs)
