A2982SLWTR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -20°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 8 |
| Supply Voltage | 35V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | A2982 |
| Pin Count | 20 |
| Number of Outputs | 8 |
| Qualification Status | Not Qualified |
| Output Type | Bipolar |
| Max Output Current | 500mA |
| Number of Elements | 8 |
| Polarity | NPN, PNP |
| Supply Voltage-Min (Vsup) | 5V |
| Interface | On/Off |
| Output Configuration | High Side |
| Output Current | -500mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 300 ns |
| Switch Type | General Purpose |
| Turn-Off Delay Time | 2 μs |
| Collector Emitter Voltage (VCEO) | 50V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5V~50V |
| Driver Number of Bits | 8 |
| Collector Emitter Saturation Voltage | 1.8V |
| Output Peak Current Limit-Nom | 0.35A |
| Max Junction Temperature (Tj) | 150°C |
| Turn Off Time | 10 μs |
| Built-in Protections | TRANSIENT |
| Ambient Temperature Range High | 85°C |
| Height | 2.65mm |
| Width | 7.5mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
A2982SLWTR Overview
It is packaged in the form of a Tape & Reel (TR).In the 20-SOIC (0.295, 7.50mm Width) package, it is included.The lighting driver has the mounting type Surface Mount.General Purpose is the switch type that it owns.Ensure reliable operation by setting the temperature to -20°C~85°C TA.By default, it is set to output 8.Operation is based on Not Required supply voltage.A maximum output voltage of Bipolar volts can be achieved by this LED driver.It is a member of the A2982 family.The termination count is 20.The 20 pins are used to operate the LED driver.It is important to note that the LED driving board has 8 functions.Maximum output current falls to 500mA when operation criteria are met.A supply voltage of 35V leads to high efficiency.It is positioned in the direction of Surface Mount.The LED driver has a total of 20 pins.The output current is set to -500mA in this case.It is self-contained in an econtainer with a capacity of Peripheral Drivers.In order to operate normally, the supply voltage (Vsup) must remain above 5V.A total of 8 elements have been found.
A2982SLWTR Features
Supplied from 35V
A2982SLWTR Applications
There are a lot of Allegro MicroSystems A2982SLWTR Power Switches ICs applications.
- Set-top-box
- Wearable Devices
- Wireless Modem Data Cards
- Set-Top Boxes
- Notebook and Tablet Computers
- Wireless/Networking Cards
- USB Power Distribution
- Low Voltage I/O System Power
- Gaming
- Solid State Drivers
