A2F200M3F-PQG208I
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Package / Case | 208-BFQFP |
| Surface Mount | YES |
| Number of Pins | 208 |
| Operating Temperature | -40°C~100°C TJ |
| Packaging | Tray |
| Published | 2007 |
| Series | SmartFusion® |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 208 |
| Terminal Finish | Pure Matte Tin (Sn) |
| Subcategory | Field Programmable Gate Arrays |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 1.5V |
| Terminal Pitch | 0.5mm |
| Frequency | 80MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | A2F200 |
| Number of Outputs | 66 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.5V |
| Interface | EBI/EMI, Ethernet, I2C, SPI, UART, USART |
| Max Supply Voltage | 1.575V |
| Min Supply Voltage | 1.425V |
| Number of I/O | MCU - 22, FPGA - 66 |
| RAM Size | 64KB |
| Core Processor | ARM® Cortex®-M3 |
| Peripherals | DMA, POR, WDT |
| Connectivity | EBI/EMI, Ethernet, I2C, SPI, UART/USART |
| Architecture | MCU, FPGA |
| Programmable Logic Type | FIELD PROGRAMMABLE GATE ARRAY |
| Core Architecture | ARM |
| Number of Logic Blocks (LABs) | 8 |
| Primary Attributes | ProASIC®3 FPGA, 200K Gates, 4608 D-Flip-Flops |
| Number of Equivalent Gates | 200000 |
| Flash Size | 256KB |
| Height Seated (Max) | 4.1mm |
| RoHS Status | RoHS Compliant |
This SoC is built on ARM? Cortex?-M3 core processor(s).
On this SoC, there is ARM? Cortex?-M3 core processor.Its package is 208-BFQFP.The SoC chip provides users with reliable performance because it is implemented with 64KB RAM.The internal architecture of this SoC design is based on the MCU, FPGA technique.The system on a chip is part of the series SmartFusion?.The average operating temps for this SoC meaning should be -40°C~100°C TJ.In addition, this SoC security combines ProASIC?3 FPGA, 200K Gates, 4608 D-Flip-Flops.A state-of-the-art Tray package houses this SoC system on a chip.As a whole, this SoC part is comprised of MCU - 22, FPGA - 66 inputs and outputs.Ideally, a power supply with a voltage of 1.5V should be used.It is possible to configure FIELD PROGRAMMABLE GATE ARRAY to meet specific needs during the design process.Having 208 terminations in total makes system on a chip possible.There is no doubt that this system on a chip is outstanding, just as other high-quality Field Programmable Gate Arrays will do.The SoC chip that comes with this module can be configured to have 66 outputs.The flash is set to 256KB.A2F200 will give you system on chips with similar specifications and purposes.There is 80MHz frequency associated with the wireless SoC.There is no doubt that the SoC meaning is based on the core architecture of ARM.This is the version with 208 pins.It is rated with 1.575V maximum supply voltage.As long as it receives at least 1.425V of power, then it is working.
ARM? Cortex?-M3 processor.
64KB RAM.
Built on MCU, FPGA.
256KB extended flash.
Core Architecture: ARM
There are a lot of Microsemi Corporation
A2F200M3F-PQG208I System On Chip (SoC) applications.
- Healthcare
- Smart appliances
- Central alarm system
- Efficient hardware for inference of neural networks
- Cyber security for critical applications in the aerospace
- Microprocessors
- Automated sorting equipment
- Automotive
- Smart appliances
- Three phase UPS
