A3953SLB
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-PowerSOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -20°C~150°C TJ |
| Packaging | Tube |
| Published | 2000 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Applications | General Purpose |
| Subcategory | Motion Control Electronics |
| Voltage - Supply | 3V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | A3953 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 3.3/53.3/50V |
| Supply Voltage-Min (Vsup) | 3V |
| Interface | Parallel |
| Analog IC - Other Type | STEPPER MOTOR CONTROLLER |
| Output Configuration | Half Bridge (2) |
| Current - Output | 1.3A |
| Supply Current-Max (Isup) | 50mA |
| Voltage - Load | 3V~50V |
| Motor Type - AC, DC | Brushed DC |
| Motor Type - Stepper | Bipolar |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| REACH SVHC | Unknown |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
A3953SLB Overview
This package is designed to work with [0].This part is packed in a 16-PowerSOIC (0.295, 7.50mm Width) case.A mounting position of Surface Mountis recommended for the part.I believe it is suitable for the component connected to General Purpose.There is a possibility of providing 3V~5.5Vvolts through the device.This device operates at a temperature range of -20°C~150°C TJ.Drivers controllers is possible to categorize the motor type as Brushed DC.The part has 16terminations available.If the voltage is applied to the load at the rate of [0], the load will be affected.I would like to remind you that this amplifier should be operated at 5V.In terms of mounting, it is recommended that it be mounted in Surface Mount.Maintain a current of 1.3A for the part output.This device utilizes the STEPPER MOTOR CONTROLLERanalog integrated circuit.As a result of the A3953part number, it can be found.16pins are available on the device.Drivers controllers belongs to Motion Control Electronics series.Drivers controllers is possible to access 1outputs.A supply voltage of 5V is required for the operation of this driver.
A3953SLB Features
Applications : General Purpose
Load voltage across the chip 3V~50V
base on A3953 number
designed with 1 outputs
A3953SLB Applications
There are a lot of Allegro MicroSystems A3953SLB motor drivers applications.
- Footwell lighting
- Lighting for the ambience of tunability
- Telltale lights
- Indicator
- Brake lights
- Large format LED backlighting
- Dash
- parking lights
- Emergency lighting
- Building technology
