A3966SA
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Operating Temperature | -20°C~150°C TJ |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Applications | General Purpose |
| Additional Feature | ALSO REQUIRES VCC TO 30V VBB SUPPLY |
| Subcategory | Motion Control Electronics |
| Voltage - Supply | 4.75V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | A3966 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Interface | Parallel |
| Analog IC - Other Type | STEPPER MOTOR CONTROLLER |
| Output Configuration | Half Bridge (4) |
| Current - Output | 650mA |
| Supply Current-Max (Isup) | 50mA |
| Voltage - Load | 4.75V~30V |
| Motor Type - Stepper | Bipolar |
| Height Seated (Max) | 5.33mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
A3966SA Overview
This package was designed with Tubein mind.The part is packaged in a 16-DIP (0.300, 7.62mm) case.In most cases, it is recommended to mount the part at Through Hole.I believe it is suitable for the component connected to General Purpose.This device is capable of supplying voltages up to 4.75V~5.5V volts.This device operates at a temperature range of -20°C~150°C TJ.This part has 16termination options.You can apply voltage at 4.75V~30Vto the load.Drivers controllers is important to remember that this amplifier should be run at 5V.In terms of mounting, it is recommended that it be mounted in Through Hole.Maintain a current of 650mA for the part output.The device employs the STEPPER MOTOR CONTROLLER analog IC.Using the A3966part number, it is located.Drivers controllers belongs to the series [0].Drivers controllers is possible to access 1outputs.Also, ALSO REQUIRES VCC TO 30V VBB SUPPLYcan be found as a characteristic of this type.
A3966SA Features
Applications : General Purpose
Load voltage across the chip 4.75V~30V
base on A3966 number
designed with 1 outputs
Additional Feature: ALSO REQUIRES VCC TO 30V VBB SUPPLY
A3966SA Applications
There are a lot of Allegro MicroSystems A3966SA motor drivers applications.
- Alternative to HID lights
- Monitoring the energy that the luminaire uses
- Fog lamps
- drivers for outdoor application
- Daytime running lights (DRLs)
- Automotive exterior and interior lighting
- High brightness LED lighting
- Handheld devices
- Horticultural lighting
- LED ballasts
