A3967SLBTR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Operating Temperature | -20°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Applications | General Purpose |
| Subcategory | Motion Control Electronics |
| Voltage - Supply | 3V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | A3967 |
| JESD-30 Code | R-PDSO-G24 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Supply Voltage-Min (Vsup) | 3V |
| Interface | Logic |
| Analog IC - Other Type | STEPPER MOTOR CONTROLLER |
| Output Configuration | Half Bridge (4) |
| Current - Output | 750mA |
| Supply Current-Max (Isup) | 85mA |
| Voltage - Load | 4.75V~30V |
| Motor Type - Stepper | Bipolar |
| Step Resolution | 1, 1/2, 1/4, 1/8 |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
A3967SLBTR Overview
The package contains [0].24-SOIC (0.295, 7.50mm Width)cases are included with the part.The part should be mounted by Surface Mount.Fits the component connected to General Purpose.Drivers controllers is capable of supplying 3V~5.5V volts.This device operates at a temperature range of -20°C~150°C TJ.There are 24 terminations available on this part.At a rate of [0], voltage can be applied to the load.Drivers controllers is very important to keep in mind that this amplifier should be operated at 5V.The recommended mounting method is Surface Mount.The output current should be kept at 750mA for the part.An analog IC with the model number STEPPER MOTOR CONTROLLERis employed in the device.The A3967part number is used to locate the part.Drivers controllers is a part of the Motion Control Electronics series.There are 1 outputs available.A supply voltage of 5Vis required to operate this driver.
A3967SLBTR Features
Applications : General Purpose
Load voltage across the chip 4.75V~30V
base on A3967 number
designed with 1 outputs
A3967SLBTR Applications
There are a lot of Allegro MicroSystems A3967SLBTR motor drivers applications.
- Mobile phone display backlight and key light driving
- Multiple output capability
- Human-centric lighting
- Commercial office
- Hospitality buildings
- Lighting for health and wellbeing
- Scanning equipment
- Dome
- Step-up or step-down driver topologies
- Landscape lighting
