A3980KLP-T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Number of Pins | 28 |
| Supplier Device Package | 28-TSSOP-EP |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2006 |
| Series | Automotive, AEC-Q100 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Termination | SMD/SMT |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Applications | Automotive |
| Technology | DMOS |
| Voltage - Supply | 3V~5.5V |
| Base Part Number | A3980 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 1 |
| Output Voltage | 35V |
| Max Output Current | 1A |
| Operating Supply Voltage | 5V |
| Interface | Logic |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Output Configuration | Half Bridge (4) |
| Current - Output | 1A |
| Max Output Voltage | 35V |
| Voltage - Load | 7V~50V |
| Motor Type | Stepper |
| Motor Type - Stepper | Bipolar |
| Step Resolution | 1, 1/2, 1/8, 1/16 |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
A3980KLP-T Overview
The design contains a Tubepackage.There is 28-TSSOP (0.173, 4.40mm Width) Exposed Pad case included with the part.To mount the part by [0], it is recommended that you do so.The component connected in Automotivematches it perfectly.In this case, the device can supply 3V~5.5V volts.Drivers controllers operates wDrivers controllershin a range of -40°C~150°C TJdegrees Celsius.The voltage can applied to the load at the rate of 7V~50V.Ideally, it should be mounted in the Surface Mountposition.Set the part's output current to 1A.As a result of the A3980part number, it can be found.28pins are present on the device.There are 1 outputs available.The supply voltage for this driver is 5V.A voltage of 35Vis maintained at the output.Continually maintains the output voltage at Automotive, AEC-Q100.The motor type can be identified as Stepper.The maximal operating temperature reaches 125°C.A temperature greater than -40°Cshould be used for operation.In order to achieve the operation requirements, the maximal output current reaches [0].Devices that are capable of being applied with a maximum supply voltage of 5.5V can be applied.A minimal supply voltage of 3V is sufficient to operate the device.
A3980KLP-T Features
Applications : Automotive
Load voltage across the chip 7V~50V
base on A3980 number
designed with 1 outputs
Motor Type classified as Stepper
A3980KLP-T Applications
There are a lot of Allegro MicroSystems A3980KLP-T motor drivers applications.
- Arena lighting
- Scanning equipment
- Hazardous application
- Commercial office
- Turn signals
- Matrix LED dimmers
- Infotainment backlighting
- AM radio
- Handheld devices
- Step-up or step-down driver topologies
