A3980KLPTR
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 28-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Number of Pins | 28 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Applications | Automotive |
| Additional Feature | ALSO REQUIRES 7V TO 50V VBB SUPPLY |
| Subcategory | Motion Control Electronics |
| Technology | DMOS |
| Voltage - Supply | 3V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | A3980 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3/5V |
| Supply Voltage-Min (Vsup) | 3V |
| Interface | Logic |
| Analog IC - Other Type | STEPPER MOTOR CONTROLLER |
| Output Configuration | Half Bridge (4) |
| Current - Output | 1A |
| Voltage - Load | 7V~50V |
| Motor Type - Stepper | Bipolar |
| Step Resolution | 1, 1/2, 1/8, 1/16 |
| Length | 9.7mm |
| Width | 4.4mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
A3980KLPTR Overview
The package is designed with [0].There is 28-TSSOP (0.173, 4.40mm Width) Exposed Pad case included with the part.Mounting the part by Surface Mountis recommended.The component connected in Automotivematches it perfectly.A device with a voltage range of 3V~5.5V volts is available.A range of -40°C~150°C TJis available for operating temperature.The part supports 28terminations.You can apply voltage at 7V~50Vto the load.In order to get the best performance from this amplifier, it should be run at 5V.Its recommended mounting way is Surface Mount.Maintain the current output of the part at 1A volts.This device utilizes the STEPPER MOTOR CONTROLLERanalog integrated circuit.This can be determined by looking at the A3980 part number.This device is designed with a pin count of 28.Drivers controllers belongs to the Motion Control Electronics series.There are 1 outputs available.Continually maintains the output voltage at Automotive, AEC-Q100.Controller ic has also been assigned the characteristic [0].
A3980KLPTR Features
Applications : Automotive
Load voltage across the chip 7V~50V
base on A3980 number
designed with 1 outputs
Additional Feature: ALSO REQUIRES 7V TO 50V VBB SUPPLY
A3980KLPTR Applications
There are a lot of Allegro MicroSystems A3980KLPTR motor drivers applications.
- RGB and monochromatic LED drivers for signage and traffic signals
- Architectural lighting
- Human-centric lighting
- Daytime running lights (DRLs)
- CHMSL (center high-mount stop lamps)
- Scanning equipment
- Handheld devices
- Horticultural lighting
- Automotive instrumentation
- AM radio
