A3980KLPTR-T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Number of Pins | 28 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Automotive |
| Additional Feature | ALSO REQUIRES 7V TO 50V VBB SUPPLY |
| Subcategory | Motion Control Electronics |
| Technology | DMOS |
| Voltage - Supply | 3V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | A3980 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 1 |
| Output Voltage | 50V |
| Operating Supply Voltage | 5V |
| Supply Voltage-Min (Vsup) | 3V |
| Interface | Logic |
| Analog IC - Other Type | STEPPER MOTOR CONTROLLER |
| Output Configuration | Half Bridge (4) |
| Current - Output | 1A |
| Voltage - Load | 7V~50V |
| Motor Type - Stepper | Bipolar |
| Step Resolution | 1, 1/2, 1/8, 1/16 |
| Height | 1.05mm |
| Length | 9.7mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
A3980KLPTR-T Overview
There is a Tape & Reel (TR)package included in the design.Drivers controllers is packaged wDrivers controllersh a 28-TSSOP (0.173, 4.40mm Width) Exposed Pad case.In general, it is recommended that the part be mounted by Surface Mount.I believe it is suitable for the component connected to Automotive.There is a possibility of providing 3V~5.5Vvolts through the device.In terms of operating temperature, it falls within the range -40°C~150°C TJ.There are 28 terminations available on this part.If the voltage is applied to the load at the rate of [0], the load will be affected.The amplifier should be set to 5V.A Surface Mountmounting method is recommended for this product.Maintain the current output of the part at 1A volts.An analog IC with the model number STEPPER MOTOR CONTROLLERis employed in the device.Using the A3980part number, it is located.28pins are present on the device.The Motion Control Electronicsseries contains it.The available outputs are [0].The driver operates from a supply voltage of 5V volts.At [0], the output voltage is maintained.In this case, Automotive, AEC-Q100is maintained as the output voltage.Additionally, it possesses a characteristic of [0].
A3980KLPTR-T Features
Applications : Automotive
Load voltage across the chip 7V~50V
base on A3980 number
designed with 1 outputs
Additional Feature: ALSO REQUIRES 7V TO 50V VBB SUPPLY
A3980KLPTR-T Applications
There are a lot of Allegro MicroSystems A3980KLPTR-T motor drivers applications.
- Alternative to HID lights
- Footwell lighting
- Industrial high-bay lights
- Horticultural applications
- Automotive exterior and interior lighting
- LED ballasts
- Matrix LED dimmers
- Display LED backlighting
- Monitoring the energy that the luminaire uses
- Camcorders
