A3983SLPTR-T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Number of Pins | 24 |
| Supplier Device Package | 24-TSSOP-EP |
| Operating Temperature | -20°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -20°C |
| Applications | General Purpose |
| Technology | DMOS |
| Voltage - Supply | 3V~5.5V |
| Base Part Number | A3983 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 1 |
| Output Voltage | 35V |
| Interface | Logic |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Output Configuration | Half Bridge (4) |
| Current - Output | 2A |
| Collector Emitter Voltage (VCEO) | 35V |
| Max Collector Current | 2A |
| Voltage - Load | 8V~35V |
| Motor Type | Stepper |
| Motor Type - Stepper | Bipolar |
| Step Resolution | 1, 1/2, 1/4, 1/8 |
| Height | 1.05mm |
| Length | 7.8mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
A3983SLPTR-T Overview
The design contains a Tape & Reel (TR)package.24-TSSOP (0.173, 4.40mm Width) Exposed Padcases are included with the part.In most cases, it is recommended to mount the part at Surface Mount.In this case, it is appropriate for the component connected to General Purpose.There is a possibility of providing 3V~5.5Vvolts through the device.Drivers controllers operates wDrivers controllershin a range of -20°C~150°C TJdegrees Celsius.Drivers controllers is possible to apply voltage to the load at the rate of 8V~35V.In terms of mounting, it is recommended that it be mounted in Surface Mount.Keep the part output current at 2A.This can be determined by looking at the A3983 part number.24 pins are provided for its design.1outputs are available in total.Continually maintains the output voltage at 35V.Drivers controllers is possible to recognize Stepperas the type of motor.85°Cis the maximum operating temperature.In order to operate properly, the operating temperature should be higher than -20°C.The device is capable of operating at a maximum supply voltage of 5.5V.A minimum supply voltage of 3Vis required for the device to operate.
A3983SLPTR-T Features
Applications : General Purpose
Load voltage across the chip 8V~35V
base on A3983 number
designed with 1 outputs
Motor Type classified as Stepper
A3983SLPTR-T Applications
There are a lot of Allegro MicroSystems A3983SLPTR-T motor drivers applications.
- LED ballasts
- Hazardous application
- LCD displays
- RGB and monochromatic LED drivers for signage and traffic signals
- drivers for outdoor application
- Handheld devices
- High brightness LED lighting
- Matrix LED dimmers
- Brake lights
- AM radio
