A3984SLPTR-T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Number of Pins | 24 |
| Operating Temperature | -20°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Applications | General Purpose |
| Additional Feature | ALSO REQUIRES 8V TO 35V VBB SUPPLY |
| Subcategory | Motion Control Electronics |
| Technology | DMOS |
| Voltage - Supply | 3V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | A3984 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 2 |
| Output Voltage | 35V |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 3V |
| Interface | Logic |
| Output Configuration | Half Bridge (4) |
| Output Current-Max | 2A |
| Supply Current-Max (Isup) | 8mA |
| Collector Emitter Voltage (VCEO) | 35V |
| Max Collector Current | 2A |
| Voltage - Load | 8V~35V |
| Max Junction Temperature (Tj) | 150°C |
| Motor Type | Stepper |
| Ambient Temperature Range High | 85°C |
| Motor Type - Stepper | Bipolar |
| Step Resolution | 1, 1/2, 1/4, 1/16 |
| Height | 1.2mm |
| Length | 7.8mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
A3984SLPTR-T Overview
This package was designed with Tape & Reel (TR)in mind.24-TSSOP (0.173, 4.40mm Width) Exposed Padcases are included with the part.In most cases, it is recommended to mount the part at Surface Mount.The component connected in General Purposematches it perfectly.The device is capable of supplying a voltage of 3V~5.5V volts.This device operates at a temperature range of -20°C~150°C TJ.The part supports 24terminations.The voltage can applied to the load at the rate of 8V~35V.Ideally, it should be mounted in the Surface Mountposition.The A3984part number allows us to locate it.This device is designed with a pin count of 24.The Motion Control Electronicsseries contains it.There are 2 outputs available.Drivers controllers is maintained at 35V volts.Drivers controllers is possible to recognize the motor type as [0].There is also a characteristic ALSO REQUIRES 8V TO 35V VBB SUPPLYassociated with it.
A3984SLPTR-T Features
Applications : General Purpose
Load voltage across the chip 8V~35V
base on A3984 number
designed with 2 outputs
Motor Type classified as Stepper
Additional Feature: ALSO REQUIRES 8V TO 35V VBB SUPPLY
A3984SLPTR-T Applications
There are a lot of Allegro MicroSystems A3984SLPTR-T motor drivers applications.
- Alternative to HID lights
- Monitoring the energy that the luminaire uses
- Mobile phone display backlight and key light driving
- Automotive exterior and interior lighting
- Arena lighting
- Telltale lights
- Large format LED backlighting
- Fog lamps
- PDAs
- Building technology
