A4915METTR-T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 28-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 28 |
| Operating Temperature | -20°C~150°C TJ |
| Packaging | Cut Tape (CT) |
| Published | 2014 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| Terminal Finish | Matte Tin (Sn) |
| Applications | General Purpose |
| Additional Feature | ALSO OPERATES WITH THE RANGE OF 5V-50V SUPPLY |
| HTS Code | 8542.39.00.01 |
| Subcategory | Motion Control Electronics |
| Technology | Power MOSFET |
| Voltage - Supply | 3V~5.5V |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 24V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | A4915M |
| Function | Controller - Commutation, Direction Management |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 24V |
| Supply Voltage-Min (Vsup) | 3V |
| Interface | Parallel |
| Analog IC - Other Type | BRUSHLESS DC MOTOR CONTROLLER |
| Output Configuration | Pre-Driver - Half Bridge |
| Supply Current-Max (Isup) | 24mA |
| Voltage - Load | 5V~50V |
| Max Junction Temperature (Tj) | 150°C |
| Ambient Temperature Range High | 105°C |
| Motor Type - AC, DC | Brushless DC (BLDC) |
| Height | 1mm |
| Length | 5mm |
| Width | 5mm |
| RoHS Status | ROHS3 Compliant |
A4915METTR-T Overview
This package is designed to work with [0].The part is packaged in a 28-VFQFN Exposed Pad case.In most cases, it is recommended to mount the part at Surface Mount.In this case, it is appropriate for the component connected to General Purpose.In this case, the device can supply 3V~5.5V volts.Regarding the operating temperature, it is in the range of -20°C~150°C TJ°C.This motor type can be categorized as Brushless DC (BLDC).There are 28 terminations available in the part.At a rate of [0], voltage can be applied to the load.In order to get the best performance from this amplifier, it should be run at 24V.There is an analog integrated circuit BRUSHLESS DC MOTOR CONTROLLERpresent in the device.The A4915Mpart number allows us to locate it.Drivers controllers is designed wDrivers controllersh 28 pins.Drivers controllers is part of the series [0].Also, ALSO OPERATES WITH THE RANGE OF 5V-50V SUPPLYcan be found as a characteristic of this type.
A4915METTR-T Features
Applications : General Purpose
Load voltage across the chip 5V~50V
base on A4915M number
Additional Feature: ALSO OPERATES WITH THE RANGE OF 5V-50V SUPPLY
A4915METTR-T Applications
There are a lot of Allegro MicroSystems A4915METTR-T motor drivers applications.
- Dash
- Accurate LED current matching
- Fog lamps
- Monitoring the energy that the luminaire uses
- Side marker lights
- Industrial high-bay lights
- LED ballasts
- General lighting
- Telltale lights
- LED bias
