A4970GLBTR-T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| Terminal Finish | Matte Tin (Sn) |
| Applications | General Purpose |
| Additional Feature | ALSO REQUIRE 7.45V TO 45V |
| HTS Code | 8542.39.00.01 |
| Subcategory | Motion Control Electronics |
| Technology | DMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | A4970G |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Output Voltage | 45V |
| Supply Voltage-Max (Vsup) | 5.25V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Interface | On/Off |
| Analog IC - Other Type | BRUSHLESS DC MOTOR CONTROLLER |
| Output Configuration | Half Bridge (4) |
| Current - Output | 750mA |
| Supply Current-Max (Isup) | 10mA |
| Voltage - Load | 7.45V~45V |
| Motor Type - AC, DC | Brushed DC |
| Motor Type - Stepper | Bipolar |
| Height Seated (Max) | 2.65mm |
| Length | 15.4mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
A4970GLBTR-T Overview
Drivers controllers is designed with Tape & Reel (TR) package.The part is packaged in a 24-SOIC (0.295, 7.50mm Width) case.Drivers controllers is recommended to mount the part by Surface Mount.Drivers controllers is fDrivers controllersting for the component connected in General Purpose.This device is capable of supplying voltages up to 4.75V~5.25V volts.With regard to operating temperature, it ranges -40°C~150°C TJ. The motor type can be classified as Brushed DC.In this part, there are 24 terminations available.Voltage can be applied at a rate of 7.45V~45V volts to the load.In terms of mounting, it is recommended that it be mounted in Surface Mount.Set the part's output current to 750mA.The device utilizes the IC BRUSHLESS DC MOTOR CONTROLLERwhich is an analog IC.Based on the A4970Gpart number, it is found.24pins are available on the device.Drivers controllers belongs to the series [0].In this case, the output voltage is kept at 45V volts.The characteristic of ALSO REQUIRE 7.45V TO 45Vis also present.
A4970GLBTR-T Features
Applications : General Purpose
Load voltage across the chip 7.45V~45V
base on A4970G number
Additional Feature: ALSO REQUIRE 7.45V TO 45V
A4970GLBTR-T Applications
There are a lot of Allegro MicroSystems A4970GLBTR-T motor drivers applications.
- Industrial lighting
- A cross between entertainment
- Outdoor area lights
- Automotive applications
- Turn signals
- LED bias
- High brightness LED lighting
- Scanning equipment
- Large format LED backlighting
- Handheld devices
