A4970SLBTR-T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -20°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| Terminal Finish | Matte Tin (Sn) |
| Applications | General Purpose |
| Additional Feature | ALSO REQUIRE 7.45V TO 45V |
| HTS Code | 8542.39.00.01 |
| Subcategory | Motion Control Electronics |
| Technology | DMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | A4970S |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Output Voltage | 45V |
| Supply Voltage-Max (Vsup) | 5.25V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Interface | On/Off |
| Analog IC - Other Type | BRUSHLESS DC MOTOR CONTROLLER |
| Output Configuration | Half Bridge (4) |
| Output Current-Max | 1A |
| Supply Current-Max (Isup) | 10mA |
| Collector Emitter Voltage (VCEO) | 45V |
| Max Collector Current | 750mA |
| Voltage - Load | 7.45V~45V |
| Motor Type | Stepper |
| Motor Type - AC, DC | Brushed DC |
| Motor Type - Stepper | Bipolar |
| Height | 2.45mm |
| Length | 15.4mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
A4970SLBTR-T Overview
There is a Tape & Reel (TR)package included in the design.Drivers controllers is packaged wDrivers controllersh a 24-SOIC (0.295, 7.50mm Width) case.Mounting the part by Surface Mountis recommended.For the component connected to [0], it is suitable.4.75V~5.25V volts can be supplied by the device.Operation temperature ranges from -20°C~150°C TJ.In this case, the motor type is Brushed DC.This part offers 24terminations.If the voltage is applied to the load at the rate of [0], the load will be affected.Surface Mountis the recommended mounting method.A BRUSHLESS DC MOTOR CONTROLLERanalog integrated circuit is employed in the device.This can be determined by looking at the A4970S part number.A device with 24pins is available.The item belongs to the Motion Control Electronics series.Drivers controllers is maintained at 45V volts.This motor type can be recognized as Stepper.Additionally, it possesses a characteristic of [0].
A4970SLBTR-T Features
Applications : General Purpose
Load voltage across the chip 7.45V~45V
base on A4970S number
Motor Type classified as Stepper
Additional Feature: ALSO REQUIRE 7.45V TO 45V
A4970SLBTR-T Applications
There are a lot of Allegro MicroSystems A4970SLBTR-T motor drivers applications.
- Side marker lights
- Commercial office
- Industrial lighting
- Indicator
- PWM generators
- Indicator circuit
- High brightness LED lighting
- Dome
- Monitoring the energy that the luminaire uses
- PDAs
