A4973SLBTR-T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-PowerSOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -20°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Terminal Finish | Matte Tin (Sn) |
| Applications | General Purpose |
| Additional Feature | ALSO REQUIRE 5V TO 50V |
| Subcategory | Motion Control Electronics |
| Technology | Power MOSFET |
| Voltage - Supply | 3V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | A4973S |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 1 |
| Output Voltage | 50V |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3/5V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 2 |
| Interface | Parallel |
| Analog IC - Other Type | BRUSH DC MOTOR CONTROLLER |
| Nominal Supply Current | 2.7mA |
| Output Configuration | Half Bridge (2) |
| Collector Emitter Voltage (VCEO) | 50V |
| Max Collector Current | 1.5A |
| Voltage - Load | 5V~50V |
| Max Junction Temperature (Tj) | 150°C |
| Switching Frequency | 70kHz |
| Motor Type | Brushed |
| Ambient Temperature Range High | 85°C |
| Motor Type - AC, DC | Brushed DC |
| Motor Type - Stepper | Bipolar |
| Height | 2.65mm |
| Length | 10.3mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
A4973SLBTR-T Overview
The package is designed with [0].Drivers controllers is packaged wDrivers controllersh a 16-PowerSOIC (0.295, 7.50mm Width) case.Drivers controllers is recommended to mount the part by Surface Mount.For the component connected to [0], it is suitable.Drivers controllers is capable of supplying 3V~5.5V volts.Regarding the operating temperature, it is in the range of -20°C~150°C TJ°C.A Brushed DCmotor can be classified as a type of motor.There are 16 terminations available in the part.You can apply voltage at 5V~50Vto the load.I would like to remind you that this amplifier should be operated at 5V.In terms of mounting, it is recommended that it be mounted in Surface Mount.A BRUSH DC MOTOR CONTROLLERanalog integrated circuit is employed in the device.A4973Sis the part number that finds it.The device has 16 pins.The item belongs to the Motion Control Electronics series.1outputs are available in total.50Vis maintained as the output voltage.0 indicates that the motor type is [0].Additionally, it possesses a characteristic of [0].On this device, there are 2channels.
A4973SLBTR-T Features
Applications : General Purpose
Load voltage across the chip 5V~50V
base on A4973S number
designed with 1 outputs
Motor Type classified as Brushed
Additional Feature: ALSO REQUIRE 5V TO 50V
A4973SLBTR-T Applications
There are a lot of Allegro MicroSystems A4973SLBTR-T motor drivers applications.
- Tunnel lights
- Running preventive- maintenance diagnostics
- Large outdoor LED display
- Daytime running lights (DRLs)
- Architectural lighting
- Automotive exterior and interior lighting
- CHMSL (center high-mount stop lamps)
- Street lights
- High brightness LED lighting
- Mobile phone display backlight and key light driving
