A4975SB-T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-PowerDIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | -20°C~150°C TJ |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | Matte Tin (Sn) |
| Applications | General Purpose |
| Additional Feature | ALSO REQUIRE 5V TO 50V |
| Subcategory | Motion Control Electronics |
| Technology | Power MOSFET |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | A4975 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 1 |
| Output Voltage | 50V |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | Parallel |
| Output Configuration | Half Bridge (2) |
| Collector Emitter Voltage (VCEO) | 50V |
| Max Collector Current | 1.5A |
| Voltage - Load | 5V~50V |
| Motor Type | Stepper |
| Motor Type - Stepper | Bipolar |
| Step Resolution | 1, 1/2, 1/4, 1/8 |
| Height | 5.33mm |
| Length | 19.05mm |
| Width | 6.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
A4975SB-T Overview
The package is designed with [0].This part is packaged with a case of [0].Mounting the part by Through Holeis recommended.As a result, it is appropriate for the component connected to General Purpose.There is a possibility of providing 4.5V~5.5Vvolts through the device.Drivers controllers operates wDrivers controllershin a range of -20°C~150°C TJdegrees Celsius.The part supports 16terminations.The voltage can applied to the load at the rate of 5V~50V.In order to get the best performance from this amplifier, it should be run at 5V.The recommended way to mount it is Through Hole.The A4975part number is used to locate the part.16pins are available on the device.Drivers controllers is a part of the Motion Control Electronics series.The available outputs are [0].Continually maintains the output voltage at 50V.Stepperrepresents the motor type.Drivers controllers also has a characteristic of [0].
A4975SB-T Features
Applications : General Purpose
Load voltage across the chip 5V~50V
base on A4975 number
designed with 1 outputs
Motor Type classified as Stepper
Additional Feature: ALSO REQUIRE 5V TO 50V
A4975SB-T Applications
There are a lot of Allegro MicroSystems A4975SB-T motor drivers applications.
- Running preventive- maintenance diagnostics
- RGB and monochromatic LED drivers for signage and traffic signals
- Horticultural lighting
- Emergency lighting
- Digital still cameras
- Architectural lighting
- Brake lights
- Hazardous application
- High brightness LED lighting
- Large format LED backlighting
