A4975SLBTR-T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-PowerSOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -20°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Terminal Finish | Matte Tin (Sn) |
| Applications | General Purpose |
| Additional Feature | ALSO REQUIRE 5V TO 50V |
| HTS Code | 8542.39.00.01 |
| Subcategory | Motion Control Electronics |
| Technology | Power MOSFET |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | A4975S |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Output Voltage | 50V |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | Parallel |
| Output Configuration | Half Bridge (2) |
| Collector Emitter Voltage (VCEO) | 50V |
| Max Collector Current | 1.5A |
| Voltage - Load | 5V~50V |
| Motor Type | Stepper |
| Motor Type - Stepper | Bipolar |
| Step Resolution | 1, 1/2, 1/4, 1/8 |
| Height | 2.45mm |
| Length | 10.3mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
A4975SLBTR-T Overview
This package was designed with Tape & Reel (TR)in mind.Parts are packaged in 16-PowerSOIC (0.295, 7.50mm Width)cases.Drivers controllers is recommended that the part be mounted by Surface Mount.The component connected in General Purposeis compatible with it.The device is capable of supplying a voltage of 4.5V~5.5V volts.This device operates at a temperature range of -20°C~150°C TJ.The part supports 16terminations.In this case, the voltage can be applied to the load at the rate of 5V~50V.In order to get the best performance from this amplifier, it should be run at 5V.Ideally, it should be mounted in the Surface Mountposition.As a result of the A4975Spart number, it can be found.The device has 16 pins.Drivers controllers belongs to the Motion Control Electronics series.50Vis maintained as the output voltage.This motor type can be recognized as Stepper.Also, ALSO REQUIRE 5V TO 50Vcan be found as a characteristic of this type.
A4975SLBTR-T Features
Applications : General Purpose
Load voltage across the chip 5V~50V
base on A4975S number
Motor Type classified as Stepper
Additional Feature: ALSO REQUIRE 5V TO 50V
A4975SLBTR-T Applications
There are a lot of Allegro MicroSystems A4975SLBTR-T motor drivers applications.
- Charge pump circuits
- AM radio
- Matrix LED dimmers
- Automotive applications
- Tail lights
- Hospitality buildings
- Lighting for health and wellbeing
- Large outdoor LED display
- Dome
- Horticultural lighting
